NEW
03
FDP Feature
New platform
☑ Suitable for high protection scenarios, with motor protection level up to IP;
☑ Vibration suppression, smooth operation, safe and reliable;
☑ Reliable quality and automated production;
☑ Power planning covers W-.KW;
☑ High responsiveness, with a speed loop sampling frequency of up to KHz.
Effective marking speed
Feedback speed before setting
Feedback speed after setting
Speed step curve
0
.
5
1
.
5
2
.
5 3
.
5
4
.
5 5
.
5 6
.
5
speed RPM
S-type velocity curveLadder velocity curve
Servo motor
16bit 23bit
Vibration suppression
. Equipped with a brand new platform
Equipped with a new platform, the main frequency of the new
chip has increased by . times. The Current loop can reach
KHz, the speed loop can reach KHz, the position loop can
reach KHz, and the speed loop response bandwidth can reach
.KHz.
. Accurate positioning
It can be paired with a bit encoder to improve the positioning
accuracy and response speed of the entire servo system,
effectively improving production yield and efficiency. Among
them, the highest positioning accuracy can reach ≤ ± ".
. Vibration suppression, stable operation
The driver reduces the speed oscillation generated by the motor
during operation by using FFT multi-point notch filters (which
can be used simultaneously with ), effectively suppressing the
large amplitude vibration generated by equipment operation. It
is particularly suitable for high-speed movement, workpiece
transportation, precise assembly, cantilever handling, and
other occasions, helping the equipment operate quickly and
smoothly.
. Smooth operation, safe and reliable
The driver supports one click activation of S-curve control
function without command delay. It can be applied to the
positioning control of equipment with large inertia or flexible
equipment, ensuring smooth and safe operation of the
equipment during sudden acceleration and deceleration,
effectively overcoming mechanical vibration caused by sudden
speed changes, and reducing impact force.
. The coverage is larger and wider, supporting multiple bus
communication.
Based on Kinco's previous generation AC servo driver platform,
a new upgrade has been carried out, with a power range of W-
.KW, which is fully compatible and can be replaced. The drive
supports CANopen, EtherCAT, and Modbus bus control.
. EASY Tune optimization and upgrading+online Self-tuning
The servo system has a built-in online Self-tuning module. It
only takes a few simple steps to set the mechanical stiffness, so
that the load change under acceleration and deceleration can
be automatically calculated during the operation of the
equipment, and the PID parameters can be dynamically
adjusted in real time according to the feedback load, the
mechanical stiffness set and the application type, without any
complicated parameter setting.
04
FD5Phigh erformanceAC ervop s
Drivingintelligentequipmentstowardsnewtrends