Quick Start Guide

APPLYING THERMAL GRIZZLY THERMAL CONDUCTONAUT

Important: Avoid eye and skin contact! Keep away from children!

Contact a doctor immediately if swallowed or after eye contact!

Conductonaut is based on liquid metal and must not be used with

coolers made out of aluminium! Contact with aluminium will result in a

permanent damage of the cooling unit! Coolers with Direct-Heatpipe-

Touch may only be used if the base is made out of copper! The surface

of a CPU heatspreader is made out of nickel plated copper which

is compatible to Conductonaut. Conductonaut may also be used

directly on silicon.

1. Clean the contact surface

Clean the surface of CPU and cooler with the included cleaning

cloth. Both surfaces have to be dry and free of all residues.

2. Applying Conductonaut thermal grease

Mount the included tip to the syringe (Figure 1). Apply a pinhead-

sized amount on both, CPU and cooler (Figure 2). Spread the

thermal grease on both surfaces with the included cotton swabs.

An increased contact pressure of the cotton swab might ease the

application. Now mount the cooler.