www.timesmicrowave.com
1
www.timesmicrowave.comwww.timesmicrowave.com
2 3
Rev.0: 06/2023
High-performance broadband, flexible, low-loss 50 Ohm
coaxial cables. Features include 100% effective
shielding, available as pre-terminated assemblies, and
rugged resistance to UV, sunlight, and weather.
Indoor highly fire-retardant cable designed for runs
within return air handling plenums (e.g. dropped
ceilings, raised floors).
A stranded center conductor and rubber outer jacketed
cable designed for multiple bending/flexing cycles.
It is used for both indoor and outdoor applications.
UV Resistant Polyethylene jacketed cable designed for
30-year service outdoor use. The bending and handling
characteristics are significantly better than other
smooth wall or corrugated hard-line cables.
Ideal for…
•
Jumper Assemblies in Wireless Systems
•
Short Antenna Feeder runs
•
Applications requiring an easily routed, low loss RF cable
Ideal for…
•
Indoor Plenum Feeder runs
•
UL/NEC/CSA listed CMP/FT6
•
Any wireless application
Ideal for…
•
Communications Systems
•
Short Antenna Feeder runs
•
Any application that requires additional flexibility
Ideal for…
•
Satellite Applications
•
Video Applications-CCTV, CATV, base/broadband
•
In-Building Feeder Runs
•
Any 75 Ohm Wireless Application
The LMR
®
cable solution offers a complete line of highly
flexible, rugged, low-loss braided cables with the fastest,
easiest connector installation available. LMR cables
provide superior performance compared to RG cables
of similar size. They also provide significantly better
attenuation, shielding effectiveness, and UV resistance.
LMR
®
system is a complete solution with ultimate
simplicity. Its ruggedness, weatherability, and proven
construction provide the reliable and durable solutions
end users require that will stand the test of time.
LMR
®
is not just a family of cables –LMR products
include an extensive variety of connectors– including
X-series EZ design connectors featuring common
interface types and non-solder center pins. These
connectors can be easily terminated using
Times Microwave Systems' prep tools included
within the LMR system.
PAGE:
Index
Connectors & Tools
LMR
®
195 - Standard
LMR
®
Selection Guide
LMR
®
400 - Standard
LMR
®
900
Standard Tools & Hardware
LMR
®
1200
LMR
®
240 - Standard
LMR
®
600 - Standard
LMR
®
195 - UltraFlex
LLPX
®
Tools & Hardware
LMR
®
1200 - LLPX
®
LMR
®
240 - 75 Ohm
LMR
®
600 - 75 Ohm
LMR
®
400 - 75 Ohm
75 Ohm Tools & Hardware
LMR
®
400 - UltraFlex
LMR
®
240 - UltraFlex
LMR
®
600 - UltraFlex
LMR
®
195 - LLPX
®
LMR
®
400 - LLPX
®
UltraFlex Tools & Hardware
LMR
®
240 - LLPX
®
LMR
®
600 - LLPX
®
4
8
6
12
16
20
18
10
14
22
44
42
46
50
48
52
26
24
28
32
36
30
34
38
LMR
®
900 - LLPX
®
40
Cable Family Description Center Conductor Dielectric Outer Conductor Connectors Installation
Standard General use 50 Ohm coaxial cable Solid Foam PE Tape & copper Crimp (EZ) or Solder (TC) Indoor/Outdoor
UltraFlex Flexible construction Stranded Foam PE Tape & copper Solder (TC) Indoor/Outdoor
LLPX Plenum rated for indoor applications Solid ePTFE Tape & copper Crimp (EZ) or Solder (TC) Indoor
75 Ohm General use 75 Ohm coaxial cable Solid Foam PE Tape & copper Crimp (EZ) or Solder (TC) Indoor/Outdoor
Product line includes:
•
An array of industry standard options for cable types,
jackets, and cable sizes
•
A complete line of cable, connectors (including EZ),
tools, and accessories
•
Full range of cables sizes, from LMR-100 (0.110")
all the way up to LMR-1200- DB (1.200”)
•
A complete line of cable prep and connector
installation tools —everything needed to get from
the antenna to the equipment— so users always
have the right tools
•
Supported by Times Microwave Systems extensive
distribution network and unsurpassed technical support
Visit Us at
www.timesmicrowave.com to learn
more about how the LMR system can power your
critical communications infrastructure.
Applications:
STANDARD
The industry standard in high-
performance broadband, flexible,
low-loss 50 Ohm coaxial cables.
Features include 100% effective
shielding, availability as
pre-terminated assemblies, and
rugged resistance to UV, sunlight,
and weather.
FIRE RETARDANT
LMR-FR is a non-halogen (non-toxic),
low smoke, fire retardant cable
designed for in-building runs that can
be routed anywhere except air handling
plenums. LMR-FR is UL/NEC & CSA
listed 'CMR' and 'FT4' respectively,
meets FAA FAR25 requirements and is
MSHA-P listed for mining applications.
DIRECT BURIAL
LMR-DB is a waterproof version
of the LMR. The addition of a
waterproofing compound in and
around the foil/braid ensures
continuous reliable service should
the jacket be inadvertently
damaged during installation or
in the future.
LMR
®
System
UltraFlex
LLPX
®
LMR
®
and LLPX
®
are registered trademarks
of Times Microwave Systems.
www.timesmicrowave.comwww.timesmicrowave.com
4 5
Identifying the proper tools for a job, making sure that
you have all of the necessary tools and storing them in a
way that is quickly accessible when working remote on a
job site, has been a timeless struggle.
EZ connectors are the preferred choice for quick and reliable field installations.
Times Microwave Systems offers a complete line of site installation hardware and accessories- everything
you need to get from the antenna to the equipment:
LMR
®
connectors include a wide variety of interface
types. Advantage™ -X series feature of solderless
contact and a 'no braid trim' design, improving assembly,
reducing FOD, and making them the preferred choice for
quick and reliable field installations. Most interfaces are
also available in a solder-pin TC version.
•
No braid trimming required
•
Corrosion resistant
•
Center pin contacts made from silver or gold plated beryllium copper
•
Spring finger inner contacts
•
Crimp style outer contacts
•
Optimized connector retention
All Advantage™ EZ-X series connectors have the following benefits:
Ground kits: Perfectly sized to each LMR cable, with never a chance of the ground strap
being too tight (crushed cable), or too loose (poor grounding)
Hangers: Snap-in, butterfly
Hoisting grips: Stainless steel cable pull hoisting grips
Weatherproofing kits: Tape and cold shrink
Connectors Tools
The Times Microwave Systems hard case tool kits include
hard foam cut-outs that will keep all of the tools required
for a specific job all in one place. All it takes is a quick flip
of the lid to make sure you have everything you need.
CST-195/200
Prep tool for LMR 195/200
CST-240A
Prep tool for LMR 240
CST-400
Prep tool for LMR 400
CST-600
Prep tool for LMR 600
CST-240-PX
Prep tool for LMR 240-LLPX
CST-400-PX
Prep tool for LMR 400-LLPX
CST-600-PX
Prep tool for LMR 600-LLPX
• For LMR, LMR-DB, and LMR-FR
TK-CST-HC (Prep Tool Kit)
660
-
1268
CT-400/300
Crimp Tool for LMR 400
and LMR 300
CST-400
Prep tool for LMR 400
• For LMR-400 and 400-75 • X series connectors
TK-400/400-75EZ-HC
660-1266
CST-400-75
Prep tool for LMR 400-75
CCT-03
Cable cutting tool for
LMR-100 through LMR-400
TK-195/200/240EZ-HC
CT-240/200/195/100
Crimp tool for LMR 100/195/200/240
connectors
CST-195/200
Prep tool for LMR-195/200 connectors
• For LMR-195, 200 and 240 • X series connectors
660
-
1206
CST-240A
Prep tool for LMR-240
CCT-03
Cable cutting tool for
LMR-100 through LMR-400
Connectors & Tools