VJ High Q

www.vishay.com

Vishay Vitramon

Revision: 27-Mar-13

Document Number: 45050

For technical questions, contact: mlcc@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount Multilayer Ceramic Chip Capacitors

for High Frequency Applications

FEATURES

• Ultra-stable dielectric offering a Temperature

Coefficient of Capacitance (TCC) of

0 ppm/°C ± 30 ppm/°C over the entire

temperature range

• Low Dissipation Factor (DF)

• Wet build process

• Reliable Noble Metal Electrode (NME)

system

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Ideal for critical timing applications

• Ideal for tuning applications

ELECTRICAL SPECIFICATIONS

Note

• Electrical characteristics at + 25 °C unless otherwise specified.

Operating Temperature: - 55 °C to + 150 °C

Voltage Range: 50 V

to 200 V

Capacitance Range: 1.0 pF to 220 pF

Temperature Coefficient of Capacitance (TCC): 

0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C

Dissipation Factor (DF): 

0.1 % maximum at 1.0 V

RMS

and 1 MHz for values 1000 pF

0.1 % maximum at 1.0 V

RMS

and 1 kHz for values > 1000 pF

Aging Rate: 0 % maximum per decade

Insulation Resistance (IR): 

At + 25 °C and rated voltage 100 000 M minimum or,

1000 F whichever is less.

At + 125 °C and rated voltage 10 000 M minimum or

100 F, whichever is less.

Dielectric Strength Test:

Performed per method 103 of EIA 198-2-E.

Applied test voltages:

 200 V

-rated: 250 % of rated voltage

VJ High Q

www.vishay.com

Vishay Vitramon

Revision: 27-Mar-13

Document Number: 45050

For technical questions, contact: mlcc@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Detail ratings see “Selection Chart”

Notes

• Size 0402 available with Vishay Basic Commodity series, see datasheet: www.vishay.com/doc?28534

(1)

DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. 

Consult for questions: mlcc@vishay.com

(2)

Process code may be added with up to three digits, used to control non-standard products and /or special requirements.

(3)

Termination code “E” is for conductive epoxy assembly.

QUICK REFERENCE DATA

DIELECTRIC CASE

MAXIMUM VOLTAGE

(V)

CAPACITANCE

MINIMUM MAXIMUM

HIGH Q 

C0G (NP0)

0603 100 1.0 pF 100 pF

0805 200 1.0 pF 220 pF

ORDERING INFORMATION

VJ0805 Q 101 K X A A C ###

(2)

CASE

CODE

DIELECTRIC CAPACITANCE

NOMINAL

CODE

CAPACITANCE

TOLERANCE

TERMINATION DC VOLTAGE

RATING

(1)

MARKING PACKAGING PROCESS

CODE

0603

0805

Q = HIGH Q Expressed in

picofarads (pF).

The first two

digits are

significant, the

third is a

multiplier. An

“R” indicates a

decimal point.

Examples:

101 = 100 pF

1R8 = 1.8 pF

B = ± 0.10 pF

C = ± 0.25 pF

D = ± 0.5 pF

F = ± 1 %

G = ± 2 %

J = ± 5 %

K = ± 10 %

Note

B, C, D < 10 pF

F, G, J, K  10 pF

X = Ni barrier

100 % tin plated

F, E = AgPd

(3)

A = 50 V

B = 100 V

C = 200 V

A = Unmarked

C = 7" reel/paper tape

O = reel/flamed paper tape

I = 11 1/4"/13" reel/flamed

paper tape

P = 11 1/4"/13" reel/

paper tape

Note

“O” and “I” are used for

“F” and “E” termination

ENVIRONMENTAL STATUS

TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN

X Ni barrier 100 % tin plated matte finish Yes Yes

EAgPdYesYes

FAgPdYesNo

DIMENSIONS in inches (millimeters)

CASE

CODE

STYLE

LENGTH

(L)

WIDTH

(W)

MAXIMUM

THICKNESS

(T)

TERMINATION

(P)

MINIMUM MAXIMUM

0603 VJ0603

0.063 ± 0.006

(1.60 ± 0.15)

0.031 ± 0.006

(0.80 ± 0.15)

0.036

(0.92)

0.012

(0.30)

0.018

(0.46)

0805 VJ0805

0.079 ± 0.008

(2.00 ± 0.20)

0.049 ± 0.008

(1.25 ± 0.20)

0.057

(1.45)

0.010

(0.25)

0.028

(0.71)

MAX.