Place and date: For the issuing office:
Hellerup, 12 April 2021
DNV - Business Assurance
Tuborg Parkvej 8, 2., 2900 Hellerup, Denmark
Jesper Schultz
Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance Denmark A/S, Tuborg Parkvej 8, DK-2900 Hellerup, Denmark - TEL: +45 39 45 48 00. http://assurance.dnvgl.com
MANAGEMENT SYSTEM
CERTIFICATE
Certificate no.:
279605-2018-AQ-DEN-DANAK
Initial certification date:
20 September 2018
Valid:
12 April 2021
–
13 January 2024
This is to certify that the management system of
ITW Performance Polymers ApS
Rørdalsvej 44, 9220 Aalborg, Denmark
and the sites as mentioned in the appendix accompanying this certificate
has been found to conform to the Quality Management System standard:
ISO 9001:2015
This certificate is valid for the following scope:
The design, development, and manufacture of grouts, coatings, adhesives, and repair
compounds and the provision of application and installation instructions and related
technical consultation services.
Certificate no.: 279605-2018-AQ-DEN-DANAK
Place and date: Hellerup, 12 April 2021
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance Denmark A/S, Tuborg Parkvej 8, DK-2900 Hellerup, Denmark - TEL: +45 39 45 48 00. http://assurance.dnvgl.com
Page
2 of 2
Appendix to Certificate
ITW Performance Polymers ApS
Locations included in the certification are as follows:
Site Name
Site Address Site Scope
ITW Performance Polymers ApS Bay 150 Shannon Industrial Estate,
Shannon County,Clare, Ireland, V14 DF82
Manufacture of grouts, coatings,
adhesives, and repair compounds.
ITW Performance Polymers ApS 130 Commerce Drive, Montgomeryville,
PA, 18936-9624, USA
The design, development, and
manufacture of grouts, coatings,
adhesives, and repair compounds and the
provision of application and installation
instructions and related technical
consultation services.
ITW Performance Polymers ApS Rørdalsvej 44, 9220 Aalborg, Denmark The design, and development of UHPC
grouts, coatings, adhesives, and repair
compounds and the provision of
application and installation instructions and
related technical consultation services.
ITW Performance Polymers, Danvers 30 Endicott Street, Massachusetts,
Danvers, 01923-3786USA
Design and manufacture of Devcon and
Plexus brand methacrylate, epoxy and
urethane based adhesives and coatings.