TVS Diodes Datasheet
© 2023 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD.05/24/23
1
TPSMA6L Series
Surface Mount – 600W
Description
Features & Benefits
Maximum Ratings and Thermal Characteristics
(T
A
=25
O
C unless otherwise noted)
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at
T
A
=25ºC by 10x1000µs Waveform
(Fig.2)(Note 1), (Note 2)
P
PPM
600 W
Power Dissipation on Infinite Heat
Sink at T
A
=50
O
C
P
M(AV)
3 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
I
FSM
60 A
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
Only
V
F
3.5V V
Operating Junction and Storage
Temperature Range
T
J
, T
STG
-65 to 150 °C
Typical Thermal Resistance Junction
to Lead
R
θJL
35 °C/W
Typical Thermal Resistance Junction
to Ambient
R
θJA
200 °C/W
Notes:
1. Non-repetitive current pulse, per Fig.4 and derated above T
A
=25ºC per Fig. 3.
2. Mounted on 5.0x5.0mm copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only.
The TPSMA6L series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by load
dump and other transient voltage events, and it’s especially
suitable for high reliability and automotive application.
SMA low profile package (DO221-AC) has the same electronical
performance as the SMB package but with low height profiles
(1.1mm).
Applications
TVS devices are ideal for the protection of I/O Interfaces, V
CC
bus
and other vulnerable circuits used in Telecom, Computer, Industrial
and Consumer electronic applications.
■ Same power as standard
SMB devices (600 W)
■ Hi reliability application and
automotive grade AEC Q101
qualified
■ SMA low profile package:
less than 1.1 mm
■ Footprint compatibility with
standard SMA and SMB
products (easy to layout)
■ Typical failure mode is short
from over-specified voltage or
current
■ Whisker test is conducted
based on JEDEC JESD201A
per its table 4a and 4c
■ IEC-61000-4-2 ESD 30kV(Air),
30kV (Contact)
■ ESD protection of data lines
in accordance with IEC
61000-4-2
■ EFT protection of data lines in
accordance with IEC 61000-4-
4 (IEC801-4)
■ Low inductance, excellent
clamping capability
■ Fast response time: typically
less than 1.0ns from 0 Volts
to VBR min
■ Built-in strain relief
■ Glass passivated junction
■ High temperature soldering:
260°C/10 seconds at
terminals
■ Plastic package has
underwriters laboratory
flammability V-0
■ Typical maximum
temperature coefficient ΔV
BR
= 0.1% x V
BR
@25°C x ΔT
■ Matte tin lead–free plated
■ Halogen free and RoHS
compliant
■ Pb-free E3 means 2nd level
interconnect is Pb-free and
the terminal
Functional Diagram
Uni-directional
Cathode
Anode
Uni-directional
Agency Agency File Number
E230531
Agency Approvals
RoHS
Resources Accessories Samples
Additional Information