SGM3001/SGM3002
Low On-Resistance, Low Voltage,
SPDT Analog Switch
SG Micro Corp
www.sg-micro.com
MAY 2023 – REV. D
GENERAL DESCRIPTION
The SGM3001 (single) and SGM3002 (dual) are
bidirectional SPDT (single-pole/double-throw), TTL/
CMOS compatible analog switches. They both operate
from a 1.8V to 5.5V single power supply.
The SGM3001 and SGM3002 feature low on-resistance,
low voltage and fast switching times. The high
performances make them very suitable for multiple
applications, such as portable equipment, audio and
video signal routing, etc. In addition, the SGM3002 can
be used as a dual 2-to-1 multiplexer because it has two
normally open and two normally close switches.
The single version SGM3001 is available in a Green
SC70-6 package. The dual version SGM3002 is
available in a Green MSOP-10 package. They both
operate over an ambient temperature range of -40℃ to
+125℃.
FEATURES
● Single Supply Voltage Range: 1.8V to 5.5V
● -3dB Bandwidth: 120MHz
● Low On-Resistance: 2.5Ω (TYP)
● Low On-Resistance Flatness
● Low Crosstalk: -35dB (TYP) at 10MHz (SGM3002)
● Fast Switching Times:
t
ON
: 11ns
t
OFF
: 30ns (SGM3001)
t
OFF
: 8ns (SGM3002)
● Off-Isolation: -45dB at 10MHz
● Low Power Consumption
● Rail-to-Rail Input and Output Operation
● TTL/CMOS Compatible
● -40
℃ to +125℃ Operating Temperature Range
● SGM3001: Available in a Green SC70-6 Package
● SGM3002: Available in a Green MSOP-10 Package
APPLICATIONS
Cellular Phones
Portable Equipment
Medical Equipment
Sample-and-Hold Circuits
Personal Digital Assistants
Battery-Powered Systems
Audio and Video Signal Routing
Low On-Resistance, Low Voltage,
SGM3001/SGM3002 SPDT Analog Switch
2
MAY 2023
SG Micro Corp
www.sg-micro.com
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM3001 SC70-6
-40℃ to +125℃
SGM3001XC6/TR 3001 Tape and Reel, 3000
SGM3002 MSOP-10
-40℃ to +125℃
SGM3002XMS/TR
SGM3002
XMS
XXXXX
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
V
+
to GND ............................................................ -0.3V to 6V
Analog, Digital Voltage Range
(1)
............ -0.3V to (V
+
) + 0.3V
Continuous Current NO, NC, or COM ....................... ±150mA
Peak Current NO, NC, or COM ................................. ±250mA
Package Thermal Resistance @ T
A
= +25℃
SC70-6, θ
JA
.............................................................. 333℃/W
MSOP-10, θ
JA
.......................................................... 205℃/W
Junction Temperature ................................................. +150℃
Storage Temperature Range ........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................ +260℃
ESD Susceptibility
HBM ............................................................................. 2000V
MM ................................................................................. 400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ..................... -40℃ to +125℃
NOTE:
1. Internal diodes will clamp voltages on NC, NO, or COM that
exceed V
+
. Limit the current through the forward diode to the
maximum ratings.
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure
to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section
is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure
to observe proper handling
and installation procedures
can cause damage. ESD damage can range from subtle
performance
degradation to
complete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit
design, or specifications
without prior notice.