Datasheet
1A Equipped with Low Power Mode
Ultra-Low Noise Low Dropout Voltage Regulator
FEATURES GENERAL DESCRIPTION
Input Voltage Range (Maximum Rating):
1.7 V to 5.5 V (6.5 V)
Output Voltage Range: 1.0 V to 5.0 V
Output Voltage Accuracy:
± 1.0% (V
SET
≥ 1.8 V, T
a
= 25 °C)
Output Current: 1.0 A
Quiescent Current (V
MODE
= "Low"): Typ. 17 µA
Quiescent Current (V
MODE
= "High"): Typ. 1.5 mA
Output Noise Voltage (10 Hz to 100 kHz):
Typ. 3.7 µVrms (I
OUT
= 100 mA)
Typ. 20 µVrms (I
OUT
= 1 mA, V
MODE
= "Low")
Ripple Rejection: Typ. 75 dB (f = 1 kHz, V
SET
= 2.8 V)
Typ. 80 dB (f = 10 kHz, V
SET
= 2.8 V)
Typ. 85 dB (f = 100 kHz, V
SET
= 2.8 V)
Dropout Voltage:
Typ. 0.10 V (I
OUT
= 500 mA, V
SET
= 2.8 V, NR1641GY)
Typ. 0.20 V (I
OUT
= 1000 mA, V
SET
= 2.8 V, NR1641GY)
Thermal Shutdown Function: Typ. 165 °C
Slope of Output Voltage at Start-up:
200 µs/V or 500 µs/V
Start-up Inrush Current Limit: Typ. 250 mA
Foldback Protection
Fast / Low Power automatic mode alternative function:
MODE pin "Low" Automatic alternative mode
MODE pin "High" Fixed to fast mode
Ceramic Capacitors are Recommended:
C
IN
, C
OUT
10 µF or greater
(Built-in filter element eliminates the need
for a capacitor for noise reduction)
The NR1641 series are CMOS based low dropout
voltage regulator that achieves both ultra-low output
noise, high ripple rejection, high-speed response
characteristics, and low quiescent current.
The MODE pin input voltage can be used to select
between the automatic alternative mode and the fixed
fast mode. The automatic alternative mode changes
the internal mode between low power mode and the
fast mode according to the load current.
In addition, Slope of Output Voltage at Start-up can be
selected from 200 µs/V or 500 µs/V.
By this option, depending on the capacitance
connected to the output pin, the inrush current limit
can be changed.
Since the NR1640 has low quiescent current, low
noise, and high ripple rejection, it is suitable for IoT
devices, battery-powered devices, and the noise
sensitive analog application.
Communication device such as RF module,
Clock generation device such as PLL or VCO
High accuracy ADC and DAC
SET
IN
SET
+ 1.0 V,
C
IN
= 10 μF, C
OUT
= 10 μF
0.0001
0.001
0.01
0.1
1
10
0.01 0.1 1 10 100
Output Noise Spectral Density [µV/√Hz]
Frequency f [kHz]
系列6
系列7
系列8
系列9
V
MODE
= "Low", I
OUT
= 1mA
V
MODE
= "High, I
OUT
= 1mA
V
MODE
= "High, I
OUT
= 100mA
V
MODE
= "High, I
OUT
= 500mA
V
MODE
= "High, I
OUT
=1000mA
DFN1616-6-GY
1.6 x 1.6 x 0.4
WLCSP-6-P12
1.3 x 0.88 x 0.36
2.9 x 3.0 x 0.9
OUTPUT NOISE SPECTRAL DENSITY