Customer Value
Proposition
THERM-A-GAP GEL 60HF is part of
the Parker Chomerics family of fully
cured, one component, silicone-based,
dispensable thermal interface materials.
With a 6.2 W/m-K thermal conductivity,
it is designed for high performance heat
transfer from electronics components to
cooling features and meant to be used
across industries and applications.
The “HF” in GEL 60HF stands for “High
Flow”, indicating that the material
is ideal for high volume dispensing
applications and high throughput
production operations. As with all
Parker Chomerics thermal gels, it is
optimized for automated dispensing at
various packaging sizes while retaining
properties for easy rework and field
repair situations.
The paste-like consistency of THERM-
A-GAP GEL 60HF enables very tightly
controlled dispensing and accurate
material placement during assembly. It
requires low compressive force to deflect
under assembly pressure, subjecting
components, solder joints and PCB leads
to minimal stress.
Product Features
• Thermal conductivity: 6.2 W/m-K
• High flow rate: 80g/min
• No secondary curing required
• Low thermal impedance
• Very low compression force
• Reworkable
• Single component
• Room temperature storage
Contact Information
Parker Hannifin Corporation
Chomerics Division
77 Dragon Court
Woburn, MA 01801
phone 781 935 4850
fax 781 933 4318
chomailbox@parker.com
parker.com/chomerics
Typical Applications
• Consumer electronics
• Telecommunications equipment
• Energy storage devices
• Power electronics and modules
• Automotive control units and
sensors
• Computing components (CPUs,
GPUs, memory)
THERM-A-GAP
™
GEL 60HF
High Performance High Flow Rate Fully
Cured Dispensable GEL
THERM-A-GAP
™
GEL 60HF Product Information
† Typical properties: these are not to be construed as specifications.
Typical Properties
†
GEL 60HF Test Methods
Physical
Color Grey/Black Visual
Flow Rate, g/min - 30cc syringe with no tip, 0.100” orifice, 90psi (621 kPa) 80 Chomerics
Specific Gravity 3.3 ASTM D792
Typical Minimum Bondline Thickness, in (mm) 0.006 (0.15) Chomerics
Thermal
Thermal Conductivity, W/m-K 6.2 ASTM D5470
Heat Capacity, J/g-K 1 ASTM E1269
Coefficient of Thermal Expansion, ppm/K 150 ASTM E831
Operating Temperature Range, °F (°C)
-67 to 392 °F
(-55 to 200 °C)
Chomerics
Electrical
Dielectric Strength, Vac/mil (kVac/mm) 125 (5.0) ASTM D149
Volume Resistivity, ohm-cm 10
13
ASTM D257
Dielectric Constant @ 1000 kHz at 0.020” (0.50mm) thick 5.8 / 4.8 ASTM D150
Dissipation Factor @ 1000 kHz at 0.020” (0.50mm) thick 0.001/0.002 Chomerics
Regulatory
Flammability Rating (See UL File E482354 for Details) V-0 UL 94
RoHS Compliant Yes Chomerics Certification
Outgassing, % TML (% CVCM) 0.14 (0.07) ASTM E595
Shelf Life, months from date of manufacture 12 Chomerics
Storage Conditions, °F (°C) @ 50% Relative Humidity
50 to 90
(10 to 32)
Chomerics
Part Number
Typical Standard
Fill Volume (cc)
Typical Standard
Fill Mass (g)
Packaging Description Color
65-00-GEL60HF-0010 10 33 10cc Luer-Lock™ Manual Syringe Grey
65-02-GEL60HF-0030 27 89 30cc EFD plastic cartridge Grey
65-02-GEL60HF-0180 150 495 6oz (180cc) EFD plastic cartridge Grey
65-00-GEL60HF-0300 300 990 12oz (300cc) Aluminum Cartridge Grey
65-1P-GEL60HF-2500 2500 8250 1 U.S. gal. pail Grey
65-5P-GEL60HF-7500 7500 24750 5 U.S. gal. pail Grey
65-00-GEL60HF-0010-B 10 33 10cc Luer-Lock™ Manual Syringe Black
65-02-GEL60HF-0030-B 27 89 30cc EFD plastic cartridge Black
65-02-GEL60HF-0180-B 150 495 6oz (180cc) EFD plastic cartridge Black
65-00-GEL60HF-0300-B 300 990 12oz (300cc) Aluminum Cartridge Black
65-1P-GEL60HF-2500-B 2500 8250 1 U.S. gal. pail Black
65-5P-GEL60HF-7500-B 7500 24750 5 U.S. gal. pail Black
THERM-A-GAP
™
GEL 60HF Ordering Information
Request a
Sample
Get a sample here
Where to Buy
Find a sales rep or
distributor near you
parker.com/chomerics
© 2023 Parker Hannin Corporation. All rights reserved. CHODS1051 January 2023