Contributes to greater application reliability and miniaturization
BD7xxL05G-C series
・ Achieves ultra-low 6μA quiescent current in a compact package
・ Strong against disturbance noise and steep input voltage fluctuations, ensuring
stable output
・ Provides high withstand voltage and supports compact capacitors
Lower standby power loss contributes to longer application operation
Improves application reliability
Contributes to a smaller board area
BD7xxL05G-C series
SSOP5 Package
(2.9×2.8× 1.25mm)
45V Withstand Voltage 50mA Output
Compact Ultra-Low 6μA Quiescent Current LDO Regulators
ComfySIL™ is a trademark or registered trademark of ROHM Co., Ltd.
■ Improves Application Reliability
Noise Immunity Comparison vs with General Products
Extremely small output voltage fluctuations at all noise
frequencies reduce resources required for noise
countermeasures
Output Voltage Fluctuation (V)
Noise Frequency (MHz)
3,500
0
0.5
1.0
1.5
2.0
-0.5
-1.0
-1.5
100 1,000
ROHM Antenna Irradiation Test Results
Based on ISO11452-2
Comparison of Input Transient Response
Characteristics vs General Products
Conditions: Input voltage: 4.9V to 16V, Output current: 30mA, Ta=25°C,
Input voltage fluctuation speed: 1.0V/μs, C
OUT
=1μF
Minimal overshoot even with steep input voltage
fluctuations supports smaller output capacitors
Voltage (V)
Voltage (V)
4.5
5.0
5.5
6.0
0
5
10
15
20
Time (50μs/div)
■ Contributes to a Smaller Board Area
Comparing Board Area in an Automotive Power Supply
System
Reduces board area
by 29%
• No voltage clamp diode
• Smaller output capacitor
8.8mm
General
Product
LDO
4.0mm
4.0mm
General
Product
New
Product
12.4mm
Supports
smaller output
capacitors
9.8mm
2
8.12mm
2
Requires a voltage clamp diode for
use as a primary power supply
New Product
(Low Frequency)
General Product
(High Frequency)
New Product
(High Frequency)
General Product
(Low Frequency)
Unparalleled stability
New Product
BD7xxL05G-C
Input
Capacitor
Output
Capacitor
Board area
reduced approx.
29%
17% smaller
Input
Capacitor
Output
Capacitor
The high withstand voltage of
BD7xxL05G-C eliminates the need
for a voltage clamp diode
Input Voltage: 4.9V to 16V (1V/μs)
Output voltage: 5V (0.5V/div, 5V offset)
Featured Products
General Product
New Product
Output voltage increases following input voltage fluctuations
(overshoot occurs)
Voltage Clamp
Diode
Output overshoot of new product= 0.11V
Output overshoot of general product= 1.27V