Leaded Inductors (Fixed Choke Coils)
FASTRON leaded inductors come with a very wide inductance range from 0.1µH to 100000µH and with high Q values. They are available in tape and ammopack
packing.
Applications
These components are suitable for decoupling and interference suppression.
Communication: RF blocking and filtering, e.g. 12 ~ 16 kHz blocking filter.
Others: Automotive electronics, electronic household appliances, entertainment electronics, lighting devices, medical applications.
Technical Data
Core Type - Ferrite, Phenolic
Tolerances - F (1%), G (2%), H (2.5%), A (3%), J (5%), K (10%), M (20%)
Packing Code
SMCC-180K-01
Ordering Code
Example:
SMCC-180X-YY
SMCC - 180 X - YY
(Model) (Inductance Value) (Tolerance) (Packing Code)
Packing Form
Axial
Radial
Taped / Reel
01
31
Taped / Ammo pack
02
32
Colour Coding
L (µH)
Code
Gold
Silver
Clear
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Grey
White
---
---
---
---
1
2
3
4
5
6
7
8
9
Band 1
---
---
---
0
1
2
3
4
5
6
7
8
9
Band 2
x 0.1
x0.01
---
x1
x10
x100
x1000
x10000
---
---
---
---
---
Band 3 Band 4
± 5 %
± 10 %
± 20 %
---
± 1 %
± 2 %
± 3 %
---
---
---
---
---
---
J
K
M
---
F
G
A
---
---
---
---
---
---
Tol. **
code
Nominal Inductance (µH)
Reference according to IEC 60062 :
Technical Data
L – Value (rated inductance)
Measured with Bode 100 Vector Network Analyzer or equivalent at frequency f
L
Measured with Bode 100 Vector Network Analyzer or equivalent at frequency f
Q
Measured with HP 8753ES Network Analyzer or equivalent
I based on temperature rise, determined at the point where the temperature rise does not exceed 40°C
above the ambient temperature of 25°C
I1 Current based on ambient temperature of 40°C and component temperature of max. 125°C
Isat Current based on inductivity drop of 10% related to the unloaded inductivity
-55°C to +125°C (including component self-heating)
Recommended soldering method
Using lead free solder (Sn 99.9) at 260°C ± 5°C for 5 ± 0.5 seconds, min 90% solder coverage of
metallization
Standard: IEC 68-2-20 (Ta)
Resistance to Soldering Heat
Resistant to 260°C ± 5°C for 10 ± 1 seconds
Standard: IEC 68-2-20 (Tb)
Resistant to Isopropyl alcohol for 5 ± 0.5 minutes at 23°C ± 5°C
Standard: IEC 68-2-45
Defined by the following standards
IEC 68-2-1 for Cold test: -55°C for 96 hours
IEC 68-2-2 for Dry heat test: +125°C for 96 hours
IEC 60068-2-78 for Humidity test: 40°C at RH 95% for 4 days
Tensile Strength of Leads
(Pull Test)
Components withstand a pulling force of 10N for 10 ± 1 second
For MICC, MICC/N, MICCS, MICCS/N : Components withstand a pulling force of 5N for 10 ± 1 second
Condition C
3 axis, 6 times, total 18 shocks
20 mins at 5G
10 Hz to 2000 Hz
12 cycles each of 3 orientations
www.fastrongroup.com