Silicon Labs is pleased to announce the release of errata version 0.2 for EFM32PG22 devices.
2301111396 Errata Update v0.2 for
EFM32PG22
Existing Part #
EFM32PG22C200F64IM32-C
EFM32PG22C200F64IM32-CR
EFM32PG22C200F64IM40-C
EFM32PG22C200F64IM40-CR
EFM32PG22C200F128IM32-C
EFM32PG22C200F128IM32-CR
EFM32PG22C200F128IM40-C
EFM32PG22C200F128IM40-CR
EFM32PG22C200F256IM32-C
EFM32PG22C200F256IM32-CR
EFM32PG22C200F256IM40-C
EFM32PG22C200F256IM40-CR
EFM32PG22C200F512IM32-C
EFM32PG22C200F512IM32-CR
EFM32PG22C200F512IM40-C
EFM32PG22C200F512IM40-CR
EFM32PG22C200X*IM40-C
EFM32PG22C200X*IM40-CR
This change is considered a minor change which does not affect form, fit, function, quality, or reliability. The information is
being provided as a customer courtesy.
Please contact your local Silicon Labs sales representative with any questions about this notification. A list of Silicon Labs sales
representatives may be found at http://www.silabs.com.
This notification includes both standard and customer-specific part numbers. An asterisk * represents a number or letter (one or
more) in a customer-specific part number.
The following errata and workarounds have been added or updated:
• Updated the workaround in I2C_E303 (I2C Fails to Indicate New Incoming Data)
• Added CUR_E302 (Extra EM1 Current if FPU is Disabled)
• Added DCDC_E302 (DCDC Interrupts Block EM2/3 Entry or Cause Unexpected Wake-up)
• Added EUART_E301 (EUART receiver enters lockup state when using low frequency IrDA mode)
• Added EUART_E302 (Incorrect stop bits lock rx)
• Added IADC_E306 (Changing Gain During a Scan Sequence Causes an Erroneous IADC Result)
• Added USART_E304 (PRS Transmit Unavailable in Synchronous Secondary Mode)
Link to errata:
https://www.silabs.com/documents/public/errata/efm32pg22-errata.pdf
silabs.com | Building a more connected world.
Bulletin
#2023-01-11-1396