COMS RF Front-end IC

GC1107

1. Features

 2.4 GHz high-power single-chip, single-die RF front-

end IC

 Single-ended 50 Ω input and output ports

 Integrated PA with +22.5dBm output power

 Integrated Bandpass filter for Power saving TX gain

applications.

 Transmit/receive switch circuitry

 ESD protection circuitry on all ports

 QFN 16 (3 x 3 x 0.75 mm) package with exposed

ground pad. (MSL3)

2. Appllcations

 Internet of Things (IoT) devices

 Extended Range Devices

 Home and Industrial appliances

 ZigBee Systems

 Bluetooth Systems

 RF4CE Remote Control

 Custom 2.4GHz Radio Systems

3. Product Highlights

 ESD(HBM)>+8000V

 Sleep current<0.5uA

4. Description

The GC1107 is a fully integrated, single-chip RF Front-

end IC which incorporates all the RF functionality needed

for IEEE 802.15.4, ZigBee, Bluetooth, wireless sensor

network, and any other wireless systems in the 2.4 GHz

ISM band. The GC1107 integrates the PA, Bandpass filter,

Transmit and Receive switching circuitry in one CMOS

single-chip device.

Typical high power applications include home and

industrial automation, smart power, and RF4CE among

others. Combining superior performance, high sensitivity

and efficiency, low noise, small form factor, and low cost,

GC1107 is the perfect solution for applications requiring

extended range and bandwidth. GC1107 has simple and

low-voltage CMOS control logic, and requires minimal

external components for system implementation.

Figure1 Block Diagram

Data Sheet GC1107

CONTENTS

1. Features ............................................................................................................................ 1

2. Appllcations ....................................................................................................................... 1

3. Product Highlights ............................................................................................................. 1

4. Description .........................................................................................................................1

5. Absolute Maximum Ratings ............................................................................................... 3

6. Pin Description .................................................................................................................. 3

7. Recommended Operating Condition ................................................................................. 4

8. Control Logic ..................................................................................................................... 4

9. Electrical Specifications .....................................................................................................5

10. Standby Mode Technical Parameters .............................................................................. 5

11. Application Schematic ......................................................................................................6

12. Circuit Design Considerations ......................................................................................... 6

13. Package Dimensions .......................................................................................................7

14. Part Marking .................................................................................................................... 8

15. Packaging Information .....................................................................................................8

16. Disclaimer ........................................................................................................................8

17. Ordering Information ........................................................................................................9

18. Revision Record .............................................................................................................. 9