ENCLOSED AUTOMATIC TRANSFER SWITCHES ATS

The ATP series of enclosed automatic transfer switches are provided in IP65 metallic enclosure, complete with ATL 600 automatic transfer

switch controller, BF series four-pole contactors, dual power supply module type ATL DPS1 and P1 MB miniature circuit breakers (MCB)

for the protection of the measuring lines. They are used for the automatic or manual switching of the load between “MAIN LINE” and

“SECONDARY LINE” (eg. generator set). They are available in versions from 45 to 160A AC1 in four-pole conﬁguration.

Automatic transfer switch controllers type ATL 600

• set for the contactors management and command

of the generator set



;

• 5 languages (English, Italian, French, Spanish,

German);

• programmable alarms;

• control functions of the line, each one with

independent controls and timing;

• internal memory records up to 100 events;

• the backlit graphic LCD display enables the user

to check: system status, voltage and frequency

measurements, statistical data, control thresholds

and pop-up windows for alarms.

CONTROL FUNCTIONS OF THE LINES

• phase sequence and phase loss;

• minimum and maximum voltage;

Enclosure

• metallic enclosure RAL 7035 painted;

• ﬂanges for cable entries in the top and bottom sides;

• PVC locking system with double-comb tool insert;

• opening with left hinges;

• IEC degree of protection: IP65;

• compact dimensions.

 Power sources, as utility or generator set, can be independently deﬁned by end user.

• voltage asymmetry;

• minimum and maximum frequency.

Dual power supply module type

ATL DPS1

Four-pole interlocked

contactors BF series

• 4 poles;

• 230V coil;

• electrical and mechanical

interlock.

Terminal blocks

MCBs for the protection of the

measuring lines P1 MB series

(1A C curve

C 10kA)