The automatic transfer switch controllers ATL 600 - ATL601 - ATL 610 - ATL 800

can supervise and manage the changeover between 2 three-phase power sources.

The voltage and frequency measurements are shown on the graphic LCD display and

the LEDs on the front panel provide a clear indication about the power source status.

Operational characteristics ATL 600 ATL 601 ATL 610 ATL 800

Power supply voltage 110-240VAC 12/24VDC 110-240VAC and 12/24VDC 110-240VAC and 12/24/48VDC

Voltage measurement inputs

• Rated voltage Ue 100-480VAC L-L 100-480VAC L-L 100-600VAC L-L

• Measurement range 50-576VAC L-L 50-576VAC L-L 50-720VAC L-L

• Frequency range 45...65Hz

Current inputs - - -

Programmable digital inputs 6 6 8

•Type of input Negative

Programmable relay outputs 7

5 with 1 normally open contact each (NO - SPST) rated 8A 250VAC

2 with 1 changeover contact each (NO/NC - SPDT) rated 8A 250VAC

Expandability - With EXP... modules (2 max.) With EXP... modules (3 max.)

RS485 port - With EXP 1012 Built-in

Real time clock - With EXP 1012 Built-in

Compatible software and APP

and APP

, ,

and APP

Flush-mount housing 144x144mm 144x144mm 180x240mm

Degree of protection IP20 at rear. IP40 on front; IP20 at rear.

IP65 with EXP80 01 optional gasket

IP65 on front

2 power sources automatic

transfer switch controllers

Certifications and compliance

Certifications obtained:

cULus, EAC, RCM.

Compliant with standards: IEC/EN 61010-1, IEC/EN 61010-2-030,

IEC/EN 61000-6-2, IEC/EN 61000-6-4, IEC/EN 60947-1,

IEC/EN 60947-6-1,UL508, CSA C22.2 n°14.

Management of 2 power sources

Control of undervoltage, overvoltage, phase loss, asymmetry,

minimum and maximum frequency, with time delay and

independent enabling

Inputs, outputs, limits, counters and alarms are

programmable by the user

Power sources can be independently defined as

utility or generator

Automatic test management for standby and

rotation generators

Suitable for LV and MV systems

Programmable maintenance alarms

Suitable for contactors, motorised circuit breakers

and motorised changeover switches

Tie breaker management for ATL 800 only

Closed transition available for ATL 800 only

Customizable change-over devices layout and

transfer strategy for ATL 800 only

Built-in PLC technology for ATL 800 only

Built-in NFC technology for ATL 800 only.

ATL 6... ATL 800 - Some possible configurations

For ATL 610 - ATL 800 only:

Dual AC/DC power supply

Real time clock with backup energy

Expandability with EXP... modules (e.g. Ethernet, extra I/Os).