Page 1/2
An Asahi Kasei Group Company.
©2022 Senseair AB. All rights reserved.
Document: PSH3444 Rev: 5
Senseair S8
Commercial
A very small, versatile and
mass-producible CO
2
transmitter module
More than 25 years experience of research and
development within the eld of infrared gas sensing has
now brought us the smallest CO2 sensor, with NDIR-
technique, in the world – Senseair S8 Commercial. The
new sensor has excellent performance such as high
accuracy and low power consumption.
Senseair S8 Commercial is designed for high volume
production with full traceability by sensor serial number
on all manufacturing processes and key components.
Every sensor is individually calibrated and is provided
with UART digital interface. The sensor has an estimated
life time of more than 15 years.
Senseair S8 Commercial is a module that is designed
for simple integration into products. Senseair S8
Commercial can be used in a wide range of applications
such as in ventilation control to improve energy savings
and to assure a good indoor climate. Other elds of
use are personal safety and measurements to increase
process yield and to increase economic value in bio-
related processes.
Key benets
• Miniature size
• Individually calibrated
• Maintenance-free
• Long term stability
• Low power consumption
Note 1: Accuracy is specied over operating temperature range. Specication is referenced
to certied calibration mixtures. Uncertainty of calibration gas mixtures (±1%
currently) is to be added to the specied accuracy for absolute measurements.
Standard specication
Measured gas Carbon dioxide (CO
2
)
Operating Principle Non-dispersive infrared
(NDIR)
Measurement range CO
2
400 – 2000 ppm
Accuracy CO
2
±30 ppm ±3% of reading
1, 2
Maintenance No maintenance required
Life Expectancy >15 years
Power supply 4.5 – 5.25 V DC
Operation temperature range 0 – 50 °C
Communication UART (Modbus)
Dimensions 33.9 x 19.8 x 8.7 mm
Energy consumption 300 mA peak
30 mA average
Response time 2 minutes by 90%