GENERAL
1. MEASURING FUNCTION
By Connecting Optional CT Sensors, the instrument can measure and memorize DC
current of 16 circuits at the same time and the memorized data can be seen even during
measurement.
2. LOGGING MEASURING FUNCTION
This instrument displays and memorizes the average current between the selected
intervals.
Interval : 1 / 5 / 10 / 15 / 30 / 60 minutes
Contents of Memory : Measuring Time / Measuring Circuit / The average current value
Capacity of Memory : Approx. 20,000 data (72 days with 5 minutes interval)
3. OTHER FUNCTION
: Approx. 10 minutes after last key operation (this
function will not be active in case of using AC adapter,
timer set on and logging mode)
Display of Battery Charge
: Rapid Charging = Red Lamp, Trickle Charge = Green
SPECIFICATIONS
Number of Measuring Circuit
: 0~50℃, less than 80%RH w/o condensing
: -10~60℃, less than 80%RH w/o condensing
Measuring Circuit Voltage
: less than DC600V (insulated conductor)
: more than 100M Ω by DC500V insulation
tester(between input terminal and housing case) more
than 50M Ω by DC500V insulation tester (between
power supply source and housing case)
: AC2200V (50 / 60Hz) one minute between power
supply source and housing case
: AC100V~240V with adapter
Internal Ni-hydride Battery
: Approx. 4 days at continuous use by full charge
: 236(W) x 170(H) x 56(D)mm, approx. 840gs
: Carrying Case, AC Adapter, USB Cable, Instruction
Manual
: Clamp CT with i.d. 30mm & 2.8m cable, CT Carrying
Case (for max. 8 CTs)