General Data
Indicated VSWR values and gain are valid for installations on metallic surfaces of 500x500 mm.
Please refer to the outline drawing to read the cable pigtail length of each port.
This Antenna is compliant with the Radio Equipment Directive 2014/53/EU
ETSI EN 303 413 V.1.1.1 (2017-06)
Mechanical Data
Dimensions (mm) 211.5 x 62.5 (Diameter x Height)
Weight (kg) 1.2
Corrosion: Low corrosion design according to MIL-F-14072(E), 96 hours Salt Spray test.
Mounting: Shall be installed in longitudinal position to the wind/driving direction.
Suitable for installation on vehicles with a maximum speed of 160 km/hr.
Environmental Data
Environmental conditions outdoor
Operation temperature (°C) -40 to 85
Storage temperature (°C) -55 to 85
Transport temperature (°C) -40 to 85
IP rating IP69
Solar radiation UL 746C, F1
2011/65/EU (RoHS - including
2015/863 and 2017/2102)
compliant acc. Annex III
Lead-free soldered yes
WEEE 2012/19/EU no special marking needed
ELV 2000/53/EC compliant
REACH 1907/2006/EC compliant
Environmental tests: EN 60068
EN 60068-2-1 Cold temperature test Ad, -55°C, 16h
EN 60068-2-2 Dry heat test Bd +85°C, 16h
EN 60068-2-30 Damp heat cyclic test Db, +25/55°C, 2 cycles
EN 60068-2-11 Salt Mist test Ka, 96h
EN 61373 § 9 Mechanical Vibration test, Cat. 2
EN 61373 § 10 Mechanical shock test, Cat. 2
EN 60529 Ingress protection test, IP69
Material Data
Radome colour RAL 7044 (light grey)
Radome material PC (Polycarbonate)
Back plate/base plate material Aluminum
Related Products
Related Documents
Mounting instruction DOC-0001151906
Painting instruction DOC-0000256180
Security instruction DOC-0000278984
Additional Information