|PF SERIES
PCB MOUNT AC OUTPUT SOLID STATE RELAYS
MOUNTING INSTRUCTIONS
WIRING DIAGRAM
This installation sheet includes detailed mounting and wiring instructions which apply for most PF series SSRs. Be sure to visit the product series’ datasheet available at the Sensata website to complement this
information. If you have questions or need additional information please contact Tech Support.
INSTALLATION GUIDE
• PF models are designed to be mounted in a printed circuit board
• PCB slots recommendation is 0.050”
• Recommended wave solder temperature of 260°C during 5 seconds. In case of soldering iron, the
recommended tip temperature is 350°C during 5 seconds.
• Recommended distance between slots:
THERMAL DERATE INFORMATION
Specification No.: Rev. 01/11/2021
Americas
+1 (877) 502 5500
sales.crydom@sensata.com
Europe, Middle East & Africa
+44 (1202) 416170
ssr-info.eu@sensata.com
Asia Pacific
sales.isasia@list.sensata.com
China +86 (21) 2306 1500
Japan +81 (45) 277 7117
Korea +82 (31) 601 2004
India +91 (80) 67920890
Rest of Asia +886 (2) 27602006
ext 2808
Page 1
www.sensata.com
CONTACT US
Copyright © 2021 Sensata Technologies, Inc.
Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata
products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation
and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering
practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may
make corrections, enhancements, improvements and other changes to its data sheets or components without notice.
Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND
NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS
IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED
OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY
INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF.
All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS
ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH
ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS
APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.
Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.
0.50
[12.7]
0.20
[5.1]
0.40
[10.2]
ORDERING OPTIONS
Series
PF
Control Voltage
Blank: 3-15 VDC (240 and D suffix only)
4-15 VDC (380/480 and D suffix only)
90-140 VAC (A suffix only)
E: 15-32 VDC (D suffix only)
18-36 VAC (A suffix only)
Operating Voltage
240: 12-280 VAC
380: 48-530 VAC
480: 48-660 VAC
Control Input Type
D: DC Input
A: AC Input
Operating Rating
25: 25 Amps
Switching Mode
Blank: Zero Voltage Turn-On
R: Random Turn-on
PF E 240 D 25 R
Required for valid part number
For options only and not
required for valid part number
4 3 2 1
FIG.1 Convection cooling FIG.2 Forced air cooling
All dimensions are in:
inches (millimeters)