How to connect Siretta Router to the Router M2M
Management Platform
Introduction
The Siretta Router M2M management platform is designed to allow users to control Siretta
routers remotely.
This guide shows how to add an Industrial Siretta Router to the Router M2M Management
Platform.
Requirements:
· Router Quick Start Guide
· Remote Configuration Application Note
· Router M2M Management platform server name and port number (cloud.siretta.com and
8000)
Steps
1. Login to your Router web page GUI.
1.1 To login locally - (refer to Router Quick Start Guide) https://www.siretta.com/wp-
content/uploads/2019/05/Siretta-Routers-Quick-Start-Guide-Rev-1.0.pdf
1.2 To login remotely - (refer to Remote Configuration Application Note)
https://www.siretta.com/2019/06/remote-configuration-siretta-router/
2. Navigate to the 'Administration' tab on the Router web page (GUI).
3. Click M2M Settings
4. Check M2M Enable box
5. Select Fail action as Restart M2M
6. Name the device ID (user defined - for this guide 001 is used)
7. Enter M2M Server as “cloud.siretta.com”
8. Enter M2M Port as “8000”
Siretta Limited - Enabling Industrial IoT https://www.siretta.com | +44 1189 769000 | sales@siretta.com
9. Leave default Heartbeat interval "10"
10. Leave default Heartbeat retry "10"
11. Select "Remote Connect" on the Named - Pipe Enabled field
12. Enter Named-Pipe Server Port number (user defined - for this guide 1433 is used but is
not an active port)
13. Click 'Save'
14. Wait for the notification stating "Saving" followed by "Settings saved. Some services are
being restarted" to appear.
15. The Router setup is now complete.
Access Management Portal Services
1. Call Siretta support with the device details below:
1.1 Device ID (For this guide 001 is used)
1.2 IMEI number (For this guide the IMEI of the router was used)
Siretta Limited - Enabling Industrial IoT https://www.siretta.com | +44 1189 769000 | sales@siretta.com