2 mm Measuring Range
Non-Contacting Displacement Sensor System Series ds821 / Series ds822
l 2 of 20 © Bruel & Kjær Vibro GmbH / 2 mm Series ds82x / BPS0138-EN-15
EN
Product description
The displacement sensor systems of the ds820 family are based on the non-contacting eddy-current measurement
process. The distance is measured between the tip of the displacement sensor and an electrically conductive sur-
face and sent via a proportional voltage signal to a subsequent monitoring system. In the application range of
machine monitoring, this makes it possible to record the status of rotating shafts.
The ECDS system (Eddy Current Displacement Sensor) consists of the components of displacement sensor with an
integrated cable, an optional separate extension cable and the driver (oscillator/demodulator).
The displacement sensor is available as a forward as well as a reverse-side mountable version.
The ECDS system (Eddy Current Displacement Sensor) is available as series ds821 Standard and ds822 ATEX.
Each series is available in system lengths of 5 m and 10 m.
The name of a component is a combination of the series name (ds821 or ds822 ATEX) and the component
designation (mc = complete system, ds = displacement sensor, ec = connection cable or od = driver).
Colour coding
The non-contacting displacement sensor systems series ds821 and ds822 are available with various measuring ran-
ges. Each measuring range is identified by a coloured mark at the end of the integrated cable of the displacement
sensor, at the ends of the extension cable and on the driver unit. This makes it easy to identify associated compo-
nents during installation. The colour codes according to measuring range are as follows:
Displacement sensor system 2 mm Series ds821 Standard: 2 mm Series ds822 ATEX:
Complete system (mc) ds821.mc10x ds822.mc10x
Displacement sensor (ds) ds821.ds10xx ds822.ds10xx
Connection cable (ec) ds821.ec10x ds822.ec10x
Driver (oscillator/demodulator) (od) ds821.od110 ds822.od110
Colour code Blue Red
Measuring range 2 mm 4 mm