R01US0555EJ0100 Rev.1.00 Page

of 13

Mar. 31, 2022

Reference Boards of

RZ/G2H, RZ/G2M, RZ/G2N, and RZ/G2E

Start-up Guide

Introduction

This document provides a guide to prepare RZ/G2 reference boards to boot up with the Verified Linux Package v3.0.x.

Especially, procedures to write bootloader to each board are explained.

Bootloaders are written to the Flash ROM on the board using the Flash Writer or the Mini Monitor provided by

Renesas. This document explains the way to write these files using the Flash Writer.

Target

RZ/G2 Group reference boards

• Hoperun Technology HiHope RZ/G2H platform (hihope-rzg2h)

• Hoperun Technology HiHope RZ/G2M platform (hihope-rzg2m)

• Hoperun Technology HiHope RZ/G2N platform (hihope-rzg2n)

• Silicon Linux RZ/G2E evaluation kit (EK874)

Verified Linux Package version 3.0.x

Note) RZ/G2L, RZ/G2LC, and RZ/G2UL are not the target boards in this document.

R01US0555EJ0100

Rev.1.00

Mar. 31, 2022

Reference Boards of RZ/G2H, RZ/G2M, RZ/G2N, and RZ/G2E Start-up Guide

R01US0555EJ0100 Rev.1.00 Page

of 13

Mar. 31, 2022

Contents

Preparing Flash Writer .......................................................................................................... 3

1.1 Preparing cross compiler ........................................................................................................... 3

1.2 Building Flash Writer .................................................................................................................. 3

1. Hoperun Technology HiHope RZ/G2[HMN] platform (hihope-rzg2h, hihope-rzg2m,

hihope-rzg2n).................................................................................................................. 4

1.1 Preparation .................................................................................................................................. 4

1.1.1 Building files to write ............................................................................................................ 4

1.1.2 Settings .................................................................................................................................. 4

1.2 Booting Flash Writer ................................................................................................................... 5

1.3 Writing Bootloader ...................................................................................................................... 6

1.4 Setting U-boot.............................................................................................................................. 7

2. Silicon Linux RZ/G2E evaluation kit (EK874) ................................................................ 9

2.1 Preparation .................................................................................................................................. 9

2.1.1 Building files to write ............................................................................................................ 9

2.1.2 Settings .................................................................................................................................. 9

2.2 Booting Flash Writer ................................................................................................................... 9

2.3 Writing Bootloader .................................................................................................................... 10

2.4 Setting U-boot............................................................................................................................ 10

Revision History .................................................................................................................... 1