Evaluation board/kit and Development tool important notice

1. This evaluation board/kit or development tool is designed for use with engineering evaluation, demonstration, or development purposes only.

Do not use it for other purposes. It is not intended to meet the design requirements of finished products.

2. This evaluation board/kit or development tool is intended for use by an electronic engineer and is not a consumer product. The user should use

it properly and in a safe manner. Seiko Epson does not assume any responsibility or liability of any kind of damage and/or fire caused by its use.

The user should cease to use it when any abnormal issue occurs even during proper and safe use.

3. Parts used for this evaluation board/kit or development tool may be changed without any notice.

NOTICE : PLEASE READ THE FOLLOWING NOTICE CAREFULLY BEFORE USING THIS DOCUMENT

The contents of this document are subject to change without notice.

1. This document may not be copied, reproduced, or used for any other purpose, in whole or in part, without the consent of the Seiko Epson

Corporation (“Epson”).

2. Before purchasing or using Epson products, please contact our sales representative for the latest information and always be sure to check the

latest information published on Epson’s official web sites and other sources.

3. Information provided in this document such as application circuits, programs, usage, etc., are for reference purposes only. Using the

application circuits, programs, usage, etc. in the design of your equipment or systems is your own responsibility. Epson makes no guarantees

against any infringements or damages to any third parties’ intellectual property rights or any other rights resulting from the information. This

document does not grant you any licenses, intellectual property rights or any other rights with respect to Epson products owned by Epson or

any third parties.

4. Epson is committed to constantly improving quality and reliability, but semiconductor products in general are subject to malfunction and

failure. By using Epson products, you shall be responsible for your hardware. Software and systems must be designed well enough to prevent

death or injury as well as any property damage even if any of the malfunctions or failures might be caused by Epson products. When

designing your products using Epson products, please be sure to check and comply with the latest information regarding Epson products (this

document, specifications, data sheets, manuals, Epson’s web site, etc.). When using the information included above materials such as product

data, charts, technical contents, programs, algorithms and application circuit examples, you shall evaluate your products both on a stand-alone

basis as well as within your overall systems. You shall be solely responsible for deciding whether or not to adopt and use Epson products.

5. Epson has prepared this document and programs provided in this document carefully to be accurate and dependable, but Epson does not

guarantee that the information and the programs are always accurate and complete. Epson assumes no responsibility for any damages which

you incur due to misinformation in this document and the programs.

6. No dismantling, analysis, reverse engineering, modification, alteration, adaptation, reproduction, etc., of Epson products is allowed.

7. Epson products have been designed, developed and manufactured to be used in general electronic applications (office equipment,

communications equipment, measuring instruments, home electronics, etc.) and applications individually listed in this document (“General

Purpose”). Epson products are NOT intended for any use beyond the General Purpose uses that requires particular/higher quality or reliability

in order to refrain from causing any malfunction or failure leading to death, injury, serious property damage or severe impact on society,

including, but not limited to those listed below. Therefore, you are advised to use Epson products only for General Purpose uses. Should you

desire to buy and use Epson products for a particular purpose other than a General Purpose uses, Epson makes no warranty and disclaims with

respect to Epson products, whether express or implied, including without limitation any implied warranty of merchantability or fitness for any

particular purpose. Please be sure to contact our sales representative and obtain approval in advance.

【Particular purpose】

Space equipment (artificial satellites, rockets, etc.)

Transportation vehicles and their control equipment (automobiles, aircraft, trains, ships, etc.)

Medical equipment (other than applications individually listed in this document) / Relay equipment to be placed on ocean floor

Power station control equipment / Disaster or crime prevention equipment / Traffic control equipment / Financial equipment

Other applications requiring similar levels of reliability as those listed above

8. Epson products listed in this document and our associated technologies shall not be used in any equipment or systems that laws and

regulations in Japan or any other countries prohibit to manufacture, use or sell. Furthermore, Epson products and our associated technologies

shall not be used for developing weapons of mass destruction, or any other military purposes or applications. If exporting Epson products or

our associated technologies, you shall comply with the Foreign Exchange and Foreign Trade Control Act in Japan, Export Administration

Regulations in the U.S.A. (EAR) and other export-related laws and regulations in Japan and any other countries and follow the required

procedures as provided by the relevant laws and regulations.

9. Epson assumes no responsibility for any damages (whether direct or indirect) caused by or in relation with your non-compliance with the

terms and conditions in this document.

10. Epson assumes no responsibility for any damages (whether direct or indirect) incurred by any third party that you assign, transfer, loan, etc.,

Epson products to.

11. For more details or other concerns about this document, please contact our sales representative.

12. Company names and product names listed in this document are trademarks or registered trademarks of their respective companies.

(Rev.e1.0, 2021.9)