450mA, Ultra-Low Noise and High PSRR
SGM2061 Linear Regulator in Ultra-Thin Package
2
OCTOBER 2021
SG Micro Corp
www.sg-micro.com
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
TEMPERATURE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM2061-1.8 WLCSP-0.64×0.64-4B-A
-40℃ to +125℃
SGM2061-1.8XG/TR QF Tape and Reel, 5000
SGM2061-2.5 WLCSP-0.64×0.64-4B-A
-40℃ to +125℃
SGM2061-2.5XG/TR R0 Tape and Reel, 5000
SGM2061-2.8 WLCSP-0.64×0.64-4B-A
-40℃ to +125℃
SGM2061-2.8XG/TR R1 Tape and Reel, 5000
SGM2061-3.0 WLCSP-0.64×0.64-4B-A
-40℃ to +125℃
SGM2061-3.0XG/TR R2 Tape and Reel, 5000
SGM2061-3.3 WLCSP-0.64×0.64-4B-A
-40℃ to +125℃
SGM2061-3.3XG/TR R3 Tape and Reel, 5000
SGM2061-5.0 WLCSP-0.64×0.64-4B-A
-40℃ to +125℃
SGM2061-5.0XG/TR R4 Tape and Reel, 5000
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
IN to GND ............................................................ -0.3V to 6V
OUT to GND .......................................... -0.3V to (V
IN
+ 0.3V)
EN to GND ........................................................... -0.3V to 6V
Package Thermal Resistance
WLCSP-0.64×0.64-4B-A, θ
JA
................................... 285℃/W
WLCSP-0.64×0.64-4B-A, θ
JB
..................................... 50℃/W
WLCSP-0.64×0.64-4B-A, θ
JC
................................... 116℃/W
Junction Temperature ................................................. +150℃
Storage Temperature Range ....................... -65°C to +150℃
Lead Temperature (Soldering, 10s) .......................... +260℃
ESD Susceptibility
HBM ............................................................................. 8000V
CDM ............................................................................ 1000V
RECOMMENDED OPERATING CONDITIONS
Input Voltage Range ........................................... 1.9V to 5.5V
Enable Input Voltage Range .................................. 0V to 5.5V
Input Effective Capacitance, C
IN
......................... 0.1μF (MIN)
Output Effective Capacitance, C
OUT
................. 0.5μF to 10μF
Operating Junction Temperature Range ...... -40℃ to +125℃
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure
to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section
is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure
to observe proper handling
and installation procedures
can cause damage. ESD damage can range from subtle
performance
degradation to
complete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit
design, or specifications
without prior notice.