Product Data Sheet
ARLON®
Self-Fusing
Silicone Tapes
Unsupported and Supported Self-Fusing Tapes for Industrial Applications
Property Method Unit Method A2020-R004-12 A2040-R004-12 A1010-R004-12 A1020-R004-12 A3020-R004-12 A3020-R12-12
Prole --- --- Triangular Rectangular Rectangular
Cross Section
Reinforcement --- --- None None Fiberglass
Thickness
1
ASTM D2148* inch (mm) SQA-TMS-012 0.020 (0.51) 0.040 (1.02) 0.010 (0.25) 0.020 (0.51) 0.020 (0.51) 0.030 (0.76)
Width
1
ASTM D2148* inch (mm) SQA-TMS-012 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 3.00 (76.2)
Color
2
--- --- Red Red Red Red Red Black
Tensile
Strength
ASTM D3759* PSI (kPa) SQA-TMS-009 1291 (8901) 1308 (9018) 1247 (8598) 1401 (9660) 3870 (26062) 4153 (28633)
Break
Strength
lbf/in (N/cm) --- --- --- --- --- 78 (136.6) 90 (157.6)
Elongation at
Break
ASTM D3759* % SQA-TMS-009 515 536 559 534 30 40
Adhesion
Strength
ASTM D2148* lbf/in (N/cm) SQA-TMS-015 2.9 (5.1) 3.6 (6.3) 2.4 (4.2) 3.4 (6.0) 7.4 (13.0) 8.9 (15.6)
Dielectric
Strength
ASTM D149/D2148* V/mil (kV/mm) SQA-TMS-020
689 (27.
1)
504 (19.
8)
923 (36.
3)
816 (32.
1)
705 (27.
8)
761 (30.
0)
Water
Absorption
FED-STD-601* %w/w SQA-TMS-016 1 0.6 0.8 0.5 1.8 3
Temperature
Range
-54ºC to +260ºC (-65ºF to +500ºF)
Volume
Resistivity
ASTM D257 10^13 ohm-cm min.
Self Adhesion ASTM D2240 2 p.p.i. min. (3.5 N/cm)
Hardness ASTM D2240 50 Shore A
1. Available in a variety of thicknesses and widths as illustrated on reverse. Consult your Sales Engineer or Customer Service for Availability.
2. Available colors include; red (red iron oxide), black, white, gray, blue, green, orange, yellow, vibrant red, and translucent. Custom colors available.
* Fiberglass reinforced tape tested as per Mil-1-22444C Specication.
ARLON® Self-Fusing silicone tapes are produced
from specially formulated silicone rubber. They
bond irreversibly to provide an insulative barrier
that is resistant to moisture, oxygen, ozone, and
corona over a wide temperature range -54°C up to
+260°C (-65°F up to +500°F).
These products provide superior electrical
insulation with a dielectric strength of 300 VPM
minimum at 180°C (356°F).
The information contained in this document is intended to assist you in designing with Rogers’ Elastomeric Material Solutions.
It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or
fitness for a particular purpose or that the results shown in this document will be achieved by a user for a particular purpose.
The user should determine the suitability of Rogers’ ARLON products for each application. The Rogers logo, ARLON, and the
ARLON logo are trademarks of Rogers Corporation or one of its subsidiaries. © 2019, 2020, 2022 Rogers
Corporation. All rights reserved. 0622-PDF • Publication #202-053
Product Data Sheet
ARLON®
Self-Fusing
Silicone Tapes
The information contained in this document is intended to assist you in designing with Rogers’ Elastomeric Material Solutions.
It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or
fitness for a particular purpose or that the results shown in this document will be achieved by a user for a particular purpose.
The user should determine the suitability of Rogers’ ARLON products for each application. The Rogers logo, ARLON, and the
ARLON logo are trademarks of Rogers Corporation or one of its subsidiaries. © 2019, 2020, 2022 Rogers Corporation.
All rights reserved. 0622-PDF • Publication #202-053
Extruded Tape Capabilities
Tape Type and Width (in)
Thickness
(in)
Unsupported Triangular Unsupported Rectangular Reinforced Rectangular
0.250 0.500 0.750 1.000 1.250 1.500 1.750 2.000 0.250 0.500 0.750 1.000 1.250 1.500 1.750 2.000 0.500 0.750 1.000 2.000 3.000
0.010
l l l
0.015
l l l l l l l l
0.020
l l l l l l l l l l l l l l l l l l
0.022
l
0.030
l l l l l l l l l l l l l l l l l l l
0.040
l l l l l l l l l l l l l l l l l l
0.050
l l l l l l l l l l l l l l l l l
0.060
l l l l l l l l l
0.070
l l l l l l l l l
0.080
l l l l l l l l
Colors
ARLON RapidBond MOX-Tape
Red Grey Red
Black Black
Grey
White
Blue
Indigo
Yellow
Orange
Translucent
Interleaves
ARLON RapidBond MOX-Tape
PE PE PET
Key
l
Within capability, tooling available
l
Within capability
Not capable on current equipment