1
®
FN7103.9
EL8100, EL8101
200MHz Rail-to-Rail Amplifiers
The EL8100 and EL8101 represent single rail-to-rail
amplifiers with a -3dB bandwidth of 200MHz and slew rate of
200V/µs. Running off a very low 2mA supply current, the
EL8100 and EL8101 also feature inputs that go to 0.15V
below the V
S
- rail.
The EL8100 includes a fast-acting disable/power-down
circuit. With a 25ns disable and a 200ns enable, the EL8100
is ideal for multiplexing applications.
The EL8100 and EL8101 are designed for a number of
general purpose video, communication, instrumentation, and
industrial applications. The EL8100 is available in 8 Ld SO
and 6 Ld SOT-23 packages and the EL8101 is available in a
5 Ld SOT-23 package. All are specified for operation over
the -40°C to +85°C temperature range.
Features
• 200MHz -3dB bandwidth
• 200V/µs slew rate
• Low supply current = 2mA
• Supplies from 3V to 5.0V
• Rail-to-rail output
• Input to 0.15V below V
S
-
• Fast 25ns disable (EL8100 only)
•Low cost
• Pb-Free (RoHS compliant)
Applications
• Video amplifiers
• Portable/hand-held products
• Communications devices
Pinouts
EL8100
(8 LD SOIC)
TOP VIEW
EL8100
(6 LD SOT-23)
TOP VIEW
EL8101
(5 LD SOT-23)
TOP VIEW
Ordering Information
PART NUMBER
(Note 1)
PART
MARKING PACKAGE
PKG.
DWG. #
EL8100ISZ 8100ISZ 8 Ld SOIC
(Pb-Free)
M8.15E
EL8100ISZ-T7* 8100ISZ 8 Ld SOIC
(Pb-Free)
M8.15E
EL8100ISZ-T13* 8100ISZ 8 Ld SOIC
(Pb-Free)
M8.15E
EL8100IWZ-T7* BASA
(Note 2)
6 Ld SOT-23
(Pb-free)
P6.064A
EL8100IWZ-T7A* BASA
(Note 2)
6 Ld SOT-23
(Pb-free)
P6.064A
EL8101IWZ-T7* BATA
(Note 2)
5 Ld SOT-23
(Pb-Free)
P5.064A
EL8101IWZ-T7A* BATA
(Note 2)
5 Ld SOT-23
(Pb-Free)
P5.064A
*Please refer to TB347 for details on reel specifications.
NOTES:
1. These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb
and Pb-free soldering operations). Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet
or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. The part marking is located on the bottom of the part.
1
2
3
4
8
7
6
5
-
+
NC
IN-
IN+
VS-
ENABLE
VS+
OUT
NC
1
2
3
6
4
5
-+
OUT
VS-
IN+
VS+
ENABLE
IN-
1
2
3
5
4
-+
OUT
VS-
IN+
VS+
IN-
Data Sheet September 14, 2010
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003-2005, 2007, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.