HBB Series
High Power, Quick Release Circular Connectors
Hypertac
®
Hyperboloid
Technology
Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and
custom solutions. Hypertac® (HYPERboloid conTACT) is the original superior performing hyperboloid
contact technology designed for use in all applications and in harsh and demanding
environments where high reliability and safety are critical. The inherent
electrical and mechanical characteristics of the Hypertac
hyperboloid contact ensures unrivalled performance in
terms of reliability, number of mating cycles,
low contact force and minimal contact
resistance. The shape of the
contact sleeve is formed by
hyperbolically arranged contact
wires, which align themselves
elastically as contact lines around
the pin, providing a number of
linear contact paths.
Features Benefits
Low insertion/extraction forces
The angle of the socket wires allows tight control of the
pin insertion and extraction forces. The spring wires are
smoothly deflected to make line contact with the pin.
High density interconnect systems
Significant reductions in size and weight of sub-system
designs. No additional hardware is required to overcome
mating and un-mating forces.
Long contact life
The smooth and light wiping action minimizes wear on the
contact surfaces. Contacts perform up to 100,000 insertion/
extraction cycles with minimal degradation in performance.
Low cost of ownership
The Hypertac contact technology will surpass most product
requirements, thus eliminating the burden and cost of having
to replace the connector or the entire subsystem.
Lower contact resistance
The design provides a far greater contact area and the wiping
action of the wires insures a clean and polished contact
surface. Our contact technology has about half
the resistance of conventional contact designs.
Low power consumption
The lower contact resistance of our technology results in a
lower voltage drop across the connector reducing the power
consumption and heat generation within the system.
Higher current ratings
The design parameters of the contact (e.g., the number,
diameter and angle of the wires) may be modified for any
requirement. The number of wires can be increased so the
contact area is distributed over a larger surface. Thus, the
high current carried by each wire because of its intimate line
contact, can be multiplied many times.
Maximum contact performance
The lower contact resistance of the Hypertac contact reduces
heat build-up; therefore Hypertac contacts are able to handle
far greater current in smaller contact assemblies without the
detrimental effects of high temperature.
Immunity to shock & vibration
The low mass and resultant low inertia of the wires enable
them to follow the most abrupt or extreme excursions of
the pin without loss of contact. The contact area extends
360° around the pin and is uniform over its entire length.
The 3 dimensional symmetry of the Hypertac contact design
guarantees electrical continuity in all circumstances.
Reliability under harsh environments
Harsh environmental conditions require connectors that
will sustain their electrical integrity even under the most
demanding conditions such as shock and vibration. The
Hypertac contact provides unmatched stability in demanding
environments when failure is not an option.