T5EN T5E S5E T5PF T5PFLC M4 & M4P M1HC
Interface PCIe SATA SATA SATA SATA SATA SATA
Form Factor U.2 M.2 2280 2.5” M.2 2280 2.5” 2.5” 2.5” 2.5” 2.5”
NAND Flash Type 3D TLC 3D TLC 3D TLC 3D TLC SLC 3D TLC 3D TLC MLC MLC
Capacity
3D TLC: 480GB - 7,680GB 3D TLC: 480GB - 3,840GB 3D TLC: 120GB - 3,840GB 3D TLC: 120GB - 1,920GB
60GB - 480GB 480GB - 3840GB
2.5”: 120GB - 1920GB
M.2: 240GB - 960GB
240GB - 1,920GB 1TB - 8TB
pSLC: 160GB - 2560GB pSLC: 160GB - 1280GB pSLC: 40GB - 1280GB pSLC: 40GB - 640GB
Sustained Read/Write
Performance
3200MB/s Read,
1600MB/s Write
520MB/s Read,
500MB/s Write
530MB/s Read,
490MB/s Write
500MB/s Read,
470MB/s Write
500MB/s Read,
470MB/s Write
500MB/s Read,
260MB/s Write
525 MB/s Read for M4P,
500 MB/s Write for M4P
520MB/s Read
500MB/s Write
Reliability
MTBF 2M hours, Telcordia 25°C 2M hours, Telcordia 25°C 2M Hours, Telcordia 25°C 2M Hours, Telcordia 25°C
1
2M Hours, Telcordia 25°C
1
3M Hours
>2M Hours for M4P
1.5M Hours
Data Reliability 1 in 10
17
bits read 1 in 10
17
bits read 1 in 10
17
bits read 1 in 10
17
bits read 1 in 10
17
bits read
M4P: up to 120 bits in 2K bytes
M4: up to 66 bits in 1K bytes
1 in 10
15
bits read
Data Retention 10 years @ 25°C 10 years @ 25°C 10 years @ 25°C 10 years @ 25°C 10 years @ 25°C
1 year at 55°C
10 years at 40°C for M4P
12 months @ 30°C
Endurance
3D TLC: 1,000 TDW 3D TLC: 1,000 TDW
30,000 TDW 2,100 TDW 2,100 TDW
M4P: 2,100 TDW
M4: 1,200 TDW
250 TDW
pSLC: 10,000 TDW pSLC: 10,000 TDW
Power Loss Protection pFail No pFail pFail No pFail pFail pFail pFail pFail Fast Flush of Cached Data
Warranty 1 Year 1 Year 1 Year 1 Year 1 Year 1 Year 1 Year
Environmental
Operating Temperature Industrial (-40°C to 85°C) Industrial (-40°C to 85°C) Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Commercial (0°C to 70°C)
Industrial (-40°C to 85°C)
Commercial (0°C to 70°C)
-40°C to 85°C -40°C to 85°C
Storage Temperature -45°C to 95°C -55°C to 90°C -55°C to 95°C -55°C to 95°C -55°C to 95°C -55°C to 95°C -55°C to 95°C
Operating Shock
50g half-sine, 11 ms,
3 shocks along each axis
3
50g half-sine, 11 ms,
3 shocks along each axis
3
50g half-sine, 11 ms,
3 shocks along each axis
3
50g half-sine, 11 ms,
3 shocks along each axis
50g half-sine, 11 ms,
3 shocks along each axis
3
50g half-sine, 11 ms,
3 shocks along each axis
3
50g half-sine,
11 ms, 3 shocks along each axis
1000g half-sine, 0.5 ms
Operating Vibration 10g rms, 10-2000Hz
3
16.4g rms, 10-2,000 Hz 10g rms, 10-2000Hz
3
16.4g rms, 10-2,000 Hz 16.4g rms, 10-2,000 Hz
3
16.4g rms, 10-2,000 Hz
3
16.4g rms, 10-2,000 Hz 16.4g rms, 10-2,000 Hz
Relative Humidity 5% - 95% non-condensing
3
5% - 95% non-condensing 5% - 95% non-condensing 5% - 95% non-condensing 5% - 95% non-condensing 5% - 95% non-condensing 5% - 95% non-condensing
Altitude 24,384 m (80,000 ft)
3
24,384 m (80,000 ft) 24,384 m (80,000 ft) 24,384 m (80,000 ft) 24,384 m (80,000 ft) 24,384 m (80,000 ft) 24,384 m (80,000 ft)
Conformal Coating Optional Optional Optional Optional Optional Optional Optional
Security (Protection & Data Elimination)
ATA password N/A N/A
■ ■
■ ■ ■ ■ ■
AES 256b
■ ■ ■ ■ ■ ■ ■ ■ ■
Write Protect
■ ■ ■
Optional
■ ■ ■ ■
External HW trigger
■ ■ ■ ■ ■ ■ ■
Erase Key and ash
■ ■ ■ ■ ■ ■ ■
TCG Opal 2.0
■ ■ ■ ■ ■ ■ ■ ■
FIPS 140-2
■
4
■
4
MIL Erase Sequences se Sequences
NSA-9-12
■ ■ ■ ■ ■ ■
DoD NISPOM 5220.22-M
■ ■ ■ ■ ■ ■ ■
DoD NISPOM 5220.22-M-Sup 1
■ ■ ■ ■ ■ ■
NSA/CSS Manual 130-2
■ ■ ■ ■ ■ ■ ■
NSA/CSS Manual 9-12
■ ■ ■ ■ ■ ■ ■
Army AR 380-19
■ ■ ■ ■ ■
Navy NAVSO P-5239-26
■ ■ ■ ■ ■ ■ ■
Air Force AFSSI-5020
■ ■ ■ ■ ■ ■
RCC –TG IRIG 106-07
■ ■ ■ ■
1
Estimated. Ofcial MTBF pending
2
Based on 128 KByte block transfers and continuous, sequential writes to the drive. The number does not include le system overhead, which may vary depending on the le system. The total life span of the drive depends on both the write endurance numbers and MTBF. TDW → Total Drive Writes = (Terabytes Written) *1000 / (Drive Capacity GB)
3
Testing Pending
4
FIPS 140-2 Inside
Product Comparison Chart
Rugged, Reliable, Secure SSDs
©2022, SMART Modular Technologies, All rights reserved. The stylized “S” in conjunction with “SMART”, as well as “SMART Modular Technologies” are registered trademarks of SMART Modular Technologies. All other trademarks are the property of the respective owners. These materials are provided by SMART Modular Technologies as a service to its customers and may only be used for informational purposes. 04.19.22/SMARTRuggedCompShart/Rev.10