Data sheet
Creation date December 25, 2017 5:21:04 PM CET
Catalogue status 01.12.2017 / We reserve the right to make technical changes. 1
OMNIMATE Signal - series TOP4G
TOP4GS4/90 7.62 OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 1429-0
Fax: +49 5231 14292083
www.weidmueller.com
General ordering data
Type TOP4GS4/90 7.62 OR
Order No. 0290160000
Version PCB terminal, 7.62 mm, No. of poles: 4, 90°,
Solder pin length (l): 3.5 mm, tinned, Orange, TOP
connection, Clamping range, rated connection,
max.: 6 mm², Box
GTIN (EAN) 4008190110208
Qty. 50 pc(s).
Product data IEC: 1000 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 30 A / AWG 26 - AWG 10
Packaging Box
Conductor entry and screw connection in the same
direction on this PCB terminal with 7.62 mm pitch for
conductor cross-sections up to 6.0 mm². Conductor
outlet direction 90° and 180°.
• 0.20 - 6.0 mm² (IEC) / 26 - 10 AWG (UL)
• 1000 V (IEC) / 300 V (UL)
• 32 A (IEC) / 30 A (UL)
Data sheet
OMNIMATE Signal - series TOP4G
TOP4GS4/90 7.62 OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 1429-0
Fax: +49 5231 14292083
www.weidmueller.com
Technical data
Creation date December 25, 2017 5:21:04 PM CET
Catalogue status 01.12.2017 / We reserve the right to make technical changes. 2
Dimensions and weights
Net weight 32.6 g
System parameters
Product family OMNIMATE Signal - series
TOP4G
Wire connection method
TOP connection
Mounting onto the PCB THT solder connection
Conductor outlet direction 90°
Pitch in mm (P) 7.62 mm
Pitch in inches (P) 0.3 inch
No. of poles 4
Fitted by customer No
Solder pin length (l) 3.5 mm
Solder pin dimensions 0.8 x 0.8 mm
Solder eyelet hole diameter (D) 1.3 mm
Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Number of solder pins per pole 2
Screwdriver blade 0.6 x 3.5
Screwdriver blade standard DIN 5264
Tightening torque, min. 0.5 Nm
Tightening torque, max. 0.6 Nm
Clamping screw M 3
Stripping length 13 mm
L1 in mm 22.86 mm
L1 in inches 0.9 inch
Volume resistance 1.40 mΩ
Material data
Insulating material PA
Colour Orange
Colour chart (similar) RAL 2000
Insulating material group I
CTI
≥ 600
Insulation resistance
≥ 10
8
Ω
UL 94 flammability rating V-2
Contact material E-Cu
Contact surface tinned
Layer structure of solder connection 6-10 µm Sn
Storage temperature, min. -25 °C
Storage temperature, max. 55 °C
Max. relative humidity during storage 80 %
Operating temperature, min. -50 °C
Operating temperature, max. 100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max. 100 °C
Conductors suitable for connection
Clamping range, rated connection, min. 0.13 mm²
Clamping range, rated connection, max. 6 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 10
Solid, min. H05(07) V-U 0.5 mm²
Solid, max. H05(07) V-U 6 mm²
Flexible, min. H05(07) V-K 0.5 mm²
Flexible, max. H05(07) V-K 4 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min. 0.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max. 4 mm²
w. wire end ferrule, DIN 46228 pt 1, min
0.5 mm²
w. wire end ferrule, DIN 46228 pt 1,
max. 4 mm²
Plug gauge acc. to EN 60999 a x b; Ø 2.8 mm x 2.4 mm
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. no. of poles (Ta =
20°C) 32 A
Rated current, min. no. of poles (Ta =
40°C) 32 A
Rated voltage for surge voltage class /
pollution degree II/2 1,000 V
Rated voltage for surge voltage class /
pollution degree III/2 630 V
Rated voltage for surge voltage class /
pollution degree III/3 500 V
Rated impulse voltage for surge voltage
class/ pollution degree II/2 4 kV
Rated impulse voltage for surge voltage
class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage
class/ contamination degree III/3 4 kV