L-XX
L
Comes complete with fittings, adaptors, flow indicator, 1.5 m (5') each of polyethylene and vinyl
tubing, and operator’s manual.
*
Available with built-in stroke and time interval adjustment. To order, add suffix “-D” to model
number, for additional cost.
For 230 V/60 Hz voltage, add suffix “-230V60” to model number, for additional cost.
For 220 V/50 Hz voltage, add suffix “-220V50” to model number, for additional cost.
For 24 V/60 Hz voltage, add suffix “-24V60” to model number, for additional cost.
Ordering Examples: FPUDT1506-D, pump with 45 rpm, 49.0 max GPD, 129 max mL/min
range and optional timer.
FPUDT1503-230V/60 pump with 45 rpm, 16.3 maximum GPD, 46 maximum m/1min range
with 230 V/60 Hz.
Comes with
handy flow
indicator.
Additional
pump
accessories
available at
omega.com
Heavy-Duty DiapHragm-type
injector metering pumps
U Single Intake
and Discharge
U Check Valve Design
U Quick-Adjusting Feed
Mechanism
U Heavy-Duty Cartridge
Pumphead
U PTFE/EPDM Diaphragm
U Optional Timer Available
U Comes with Flow Indicator
and 7.5 m (25') of Tubing
U Can be Wall- or Shelf-Mounted
U 100% Duty Cycle
The FPUDT1500 Series injector
pumps feature a heavy-duty
cartridge valve pumphead made
of injection-molded polypropylene.
The pump consists of double-sealed
PVDF cartridge valve fittings, FKM
O-ring seals, ceramic ball checks,
Hastelloy C valve springs, and a
PTFE/EPDM diaphragm. An optional
built-in electronic percentage timer
allows the user to adjust the feed
rate or both the stroke of the
diaphragm and the timer. The pump
can also be purchased as part of a
tank system.
SPECIFICATIONS
Output Accuracy: ±10% of maximum
(water 0 psi, 5' suction lift)
Pumphead Material: Standard
polypropylene; acrylic optional
Diaphragm Material: PTFE/EP
standard; PTFE/FKM, EP, FKM optional
O-Ring Material: FKM standard; EP,
silicone optional
Cartridge Body Material: PVDF
Motors: 14, 30, 45, 60, 125 rpm
Voltage: 115 V/60 Hz; optional
230V/60 Hz, 220V/50 Hz, 24V/60 Hz
Dimensions: 127 H x 140 W x 238 mm D
(5.0 x 5.5 x 9.4")
Shipping Weight: 4.5 kg (10 lb)
Tube Dimensions:
3
⁄8" OD,
1
⁄4" ID
Maximum Pressure: 8.6 bar (125 psig)
Maximum Fluid Temperature:
54°C (130°F)
Maximum Viscosity: 1000 centipoise
Maximum Suction Lift: 3 m (10') water
Turndown Ratio: 20:1
FPUDT1500 Series
To Order
Model No. Maximum GPD Maximum mL/min Strokes/min Maximum psi
FPUDT1501 6.6 22 14 125
FPUDT1502 12.9 34 14 125
FPUDT1503* 16.3 46 30 125
FPUDT1504* 30 82 30 125
FPUDT1505* 26.6 77 45 125
FPUDT1506* 49.0 129 45 125
FPUDT1507* 31.1 92 60 125
FPUDT1508* 57.7 158 60 125
FPUDT1509* 68.4 180 125 125
FPUDT1510* 119.7 315 125 70
FPUDT1503
shown smaller
than actual size.