Page 2
MICRO-EPSILON Eltrotec GmbH
Heinkelstraße 2 · 73066 Uhingen / Deutschland
Tel. +49 (0) 7161 / 98872-300 · Fax +-49 (0) 7161 / 98872-303
eltrotec@micro-epsilon.de · www.micro-epsilon.com
colorSENSOR OT-3 Series • True Color Sensors Instruction Manual colorSENSOR OT-3-HR-30
Technical Data
Type OT-3-HR-30-8 OT-3-HR-30-16
Light source
Illumination technique
Effect of illumination
Target distance
Light spot size Ø 8 (8 dia.) mm at 30 mm Ø 16 (16 dia.) mm at 30 mm
Reproducibility
Color distance
Receiver
Alternating light operation
Ambient light
Protection class
Current consumption
Interface
Connector type
Connection cable
Housing material
Operating temperature
Storage temperature
Pulse lengthening
Max. switching current
Switching frequency
Outputs
Averaging
Voltage supply
Switching state display
Color memory capacity
TEACH button
Temperatur drift X,Y
Signal gain
EMC test
Color spaces
to PLC: 8-pole female connector (Binder series 712)
to PC: 4-pole female connector (Binder series 707)
to PLC: CAB-M9-8P-St-ge; xm-PUR; open
to PC: CAB-M5-4P-St-ge; xm-PUR; RS232; CAB-M5-4P-St-ge; xm-PVC; USB
AC-, DC-operation (adjustable or OFF in case of luminous objects adjustable via software)
Polarisation filter, focused
very intense reduction of gloss effects, adapted for highly reflected surfaces
typ. 10 mm up to 40 mm
ideal distance at 30 mm
up to 5000 Lux (in AC-operation)
IP 67 (Optics), IP64 (Controller)
RS 232 (USB optional)
in the X, Y color range each 1 digit at 12-bit A/D conversion
'E t 0.8
3-color filter detector (TRUE COLOR Detector, color filter bend according to CIE 1931)
AC: typ. 10 kHz up to 40 kHz
depends on the gain step (AMP1 up to AMP8)
DC: adjustable via PC software
-20°C - +85°C (-4°F up to +185°F)
Aluminum, anodized in black
typ. 320 mA
-20°C - + 55°C (-4°F up to +131°)
OUT 0 - OUT 4, digital (0V/+Ub), short-circuit-proof
100 mA max. switching current npn-, pnp-available
(bright-, dark-switching can be switched over)
max. 30 kHz (depends on the number of teach-colors and averaging value)
100 mA, short-circuit-proof
adjustable 0 ms up to 100 ms
8x white light LED
X/Y INT; s/i M (Lab)
according to DIN EN 60947-5-2
8 steps (AMP1 - AMP8), adjustable
< 0.01% / K
for external teaching of color reference values via input IN0
non-volatile EEPROM with parameter sets for 31 colors max.
Visualization by means of 5 yellow LED's
+24 VDC (± 10 %), protected against polarity reversal, overload protected
over 32768 values max.