Page 2
Instruction Manual colorSENSOR OT-3-GL-200
colorSENSOR OT-3
Series • True Color sensors
MICRO-EPSILON Eltrotec GmbH
Heinkelstraße 2 · 73066 Uhingen / Deutschland
Tel. +49 (0) 7161 / 98872-300 · Fax +-49 (0) 7161 / 98872-303
eltrotec@micro-epsilon.de · www.micro-epsilon.com
Technical Data
Type
Light source
Illumination technique
Effect by illumination
Target distance
Light spot size
Reproducibility
Color distance
Receiver
Alternating light operation 30
Ambient light
Protection class
Current consumption
Interface
Connector type
Connection cable
Housing Material
Operating temperature
Storage temperature
Pulse lengthening
Max. switching current
Switching frequency
Outputs
Averaging
Voltage supply
Switching state display
Color memory capacity
TEACH button
Temperature drift X,Y
Signal gain
EMC test
Color spaces
OT-3-GL-200-20
30 kHz
up to 5000 Lux
IP 64
10x white light LED, modulated 30 kHz
diffuse
Reduction of gloss effect due
typ. 50 mm up to 300 mm
ideal distance at 200 mm
in the X, Y color range each 1 digit at 12-bit A/D conversion
'Et0.8
Ø 20 (20 dia.) mm at 200 mm
3-color filter detector (TRUE COLOR Detector, color filter bend according to CIE 1931)
typ. 320 mA
RS 232 (optional USB)
Aluminum, anodized in black
to PLC: CAB-M9-8P-St-ge; xm-PUR; open
to PC: CAB-M9-5P-St-ge; xm-PUR; RS232
CAB-M9-5P-St-ge; xm-PVC; USB
to PLC: 8-pole female connector (Binder series 712)
to PC: 5-pole female connector (Binder series 712)
-20°C - + 55°C (-4°F up to +131°F)
-20°C - +85°C (-4°F up to +185°F)
adjustable 0 ms - 100 ms
100 mA, short-circuit proof
max. 30 kHz (depends on the number of teach-colors and averaging value)
100 mA max. switching current npn-, pnp-available
(bright-, dark-switching can be switched over)
over 32768 values max.
+24 VDC (± 10 %), protected against polarity reversal, overload protected
8 steps (AMP1 - AMP8), adjustable
according to DIN EN 60947-5-2
X/Y INT; s/i M (Lab)
Visualization by means of 5 yellow LED's
non-volatile EEPROM with parameter sets for 31 colors max.
for external teaching of color reference values via input IN0
< 0.01% / K