Compliant

USBLAN/LXI

GPIB

APG

CAN FDRS-232

Chroma 62000E Series of Programmable DC

Power Supplies provide single-channel output

of 1.7kW, 3.4kW, and 5kW, as well as three-

channel of 1.7kW output each configured in

an industry-leading high power density 1U

chassis. The 28 models offer fixed- and auto-

range output with current ratings up to 22.5A

and voltage ratings up to 1200V.

The 62000E series provides constant voltage

(CV) and constant current (CC) modes so that

users may switch the output priority based

on testing requirements. Along with its high

precision measurement output, its high-speed

transient response and low noise satisfies a

variety of devices and test applications in both

labs and automated test system integration.

These power supplies serve both single-

and multi-channel test applications, such

as D2D power system ATEs, automotive

component systems, reliability of aerospace

satellite power systems, long-term durability

of active and passive components, industrial

and medical system integrated power

supplies, supply and aging of semiconductor

power components, LED and laser diode,

production and aging of solar modules, etc.

Compared with traditional power supplies,

the Chroma 62000E series saves room by

expanding usable rack space, decreases

energy consumption, and simplifies testing at

a competitive price.

The 62000E series DC power supply has 100

programmable sequence settings. Through

List Mode, users can customize the desired

output waveforms and set the dwell time

between 10ms and 65535s to meet various

test requirements. These functions apply to

voltage drop testing of DC/DC converters and

inverters, life cycle testing of components,

aviation testing of aircraft, etc.

The 62000E series DC power supply has

1-phase/3-phase 200~240Vac and 3-phase

380~400Vac input with active PFC and 92%

high efficiency. This helps customers to

save electricity costs and power capacity

distribution when performing high power

testing, and adapt to a range of power

systems around the world. In addition, the

power supply can be controlled by the

supported digital USB/LAN(LXI)/CAN FD/

GPIB and analog APG interfaces based on

integration requirements of the DUT system.

PROGRAMMABLE DC POWER SUPPLY

MODEL 62000E SERIES

KEY FEATURES

■ Voltage rating: Up to 1200V

Current rating: 22.5A max.

■ Single output models:

1.7kW, 3.4kW, 5kW

■ Multiple output models:

3x1.7kW channels in 1U

■ Master/slave parallel up to a max of 20kW

■ Fixed or Auto-ranging output models

■ Auto sequence programming

■ CV/CC modes priority

■ High-precision measurement

■ High speed transient response <1ms

■ Low output ripple & noise

■ Intuitive and user-friendly touch screen

■ Standard USB/LAN/LXI interfaces

■ Optional APG, CAN FD, GPIB, and

master/slave parallel control interfaces

■ AC input: 1-phase/3-phase 200~240Vac

or 3-phase 380~400Vac

APPLICATIONS

■ Electric vehicles component testing

■ Semiconductor testing and burn-in

■ Medical equipment power supply

■ Aerospace and aviation testing

■ Test & measurement ATE and

manufacturing

■ Industrial and system integrated

power supply

■ Equipment manufacturing and system

integration

■ Suitable for multi-channel power supply

applications such as simulation for aviation,

aerospace and satellite systems, and

burn-in & processing for active/passive

components, D2D modules, batteries,

accelerator magnets, evaporation heating

sources, etc.

Preliminary

The industry-leading high power density design enables 3 channels of 1.7kW output in a 1U chassis. Each channel is isolated for

independent voltage/current control and measurement that saves cabinet space for system integration and simplifies cable configuration.

For example, take a system integration manufacturer who requires nine channels of programmable DC power. Other 1U supplies would

require 9 single-channel power supplies stacked at a height of 9U, while the 62000E series power supply can do the job with only 3 units at

3U height (using 3-channel models).

The 62000E series has auto-range output and fixed-range output power supply options available for selection based on the customer's

application, specification, and budget. For example, the 62050E-600P is an auto-range model with output specifications of 5kW/600V/22.5A

that can be flexibly operated in different combinations (as shown in the figure on the left). It provides a 22.5A large current when outputting

223V low voltage and a small current of 8.4A at 600V high voltage. This means a customer with DUTs that need to be tested by both low

voltage/high current and high voltage/low current can choose an auto-range DC power supply. The 62050E-600P can be used in an ATE for

test & measurement to replace multiple DC power supplies, saving cost and space.

The 62050E-600 model is an economical

fixed-range power supply designed with

an output of 5kW/600V/8.4A DC source (as

shown on the right). This fixed-range supply

can provide power for manufacturing,

giving the equipment supplier a cost-

effective power source for integration when

producing DUTs with fixed specifications.

Users must consider compact size, light weight, high utilization, flexibility of assembling/disassembling multiple power systems, as well as

system failure maintenance time, since each of these factors will affect the R&D and production line. The 62000E series DC power supply

has a master/slave control mode to parallel up to 4 devices with a maximum of 20kW. The easy-to-operate parallel operation mode is

convenient for R&D labs, verification units, and production lines to use. In this mode, the master will download the setting values to the

slave units allowing users to operate it like a standalone unit. The parallel system adopts a digital current sharing design with high stability

and anti-noise interference.

* Only available for single-channel output models.

* Requires optional A620042 interface.

* Call for availability.

HIGH POWER DENSITY 1.7KW X 3CH IN 1U

AUTO-RANGE AND FIXED-RANGE OUTPUT

UP TO 20KW MASTER/SLAVE PARALLEL OPERATION

Channel 1 2 3 4 5 6 7 8 9

Voltage 285V 380V 400V 450V 450V 500V 500V 550V 600V

Current 5.6A 3.8A 3A 3A 3.6A 2.8A 2.8A 2.8A 2.8A

Power 1600W 1444W 1200W 1350W 1620W 1400W 1400W 1540W 1680W

Power 1.7kW

Voltage 230~600V

Save 67%

in height

CH 2

Power 1.7kW

Voltage 230~600V

CH 1

Power 1.7kW

Voltage 230~600V

1U Height

AC Input

220V, 3 Phase

380V, 3 Phase

CH 3

Chroma Solution:

3U Height