Waldenburg, 18.05.2020
Certificate of Compliance for Directive 2011/65/EU
and 2015/863 (RoHS III)
This document certifies that all components and all homogeneous subcomponents
manufactured by Würth Elektronik eiSos GmbH & Co.KG are in compliance with the
Directive 2011/65/EU and the amendment of Directive 2015/863 of the European
Parliament on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS III Directives).
Since the publication of the amendment Directive 2015/863 on June 4, 2015, Würth
Elektronik eiSos GmbH & Co.KG has been aware of our obligation and immediately
launched verification of our products.
In this amendment the member states are requested to ensure the compliance with
this directive until the 21
st
July 2019.
Since April 2018 the Würth Elektronik eiSos GmbH & Co. KG can confirm that our
products don’t use any of four phthalates above its threshold in Directive 2015/863.
As Würth Elektronik eiSos GmbH & Co.KG is a manufacturer of electronic
components, and since products are not placed or made available directly on the
market for consumers and end-customers, we are not bound to label our products
according to Article 7c) of Directive 2011/65/EU. On request of any government
agency Würth Elektronik eiSos GmbH & Co. KG will provide necessary documents,
which verify the compliance to Directive 2011/65/EU and the amendment of Directive
2015/863 based on harmonized standards. Our suppliers are contractually bound to
be compliant to the Directive 2011/65/EU and the amendment of Directive 2015/863.
According to the directive, some of hazardous substances listed in this directive can
be exempted in certain filed. To get the details for parts produced by Würth Elektronik
eiSos GmbH & Co.KG which are RoHS compliant with exemption, please go to below
link:
Part List RoHS Exemptions
The latest version of this document is available on our Homepage
www.we-online.com/DownloadCenter
Michael Weser Sherry Li
Environmental Manager Material Management