D Subminiature
Connectors
Dimensions are shown in mm (inch)
Dimensions subject to change
1
D Subminiature Contents
Contents Page
General Application D Subminiature Connectors
ɀ Straight PCB Selection Guide.............................................2
D*NG Pressfit Termination...............................................4
D*M Solder Termination (Machined) — Standard PC Tails.......................6
ZD* Solder Termination (Stamped).........................................8
D* Solder Termination (Machined) — European PC Tails .......................10
D* Wrap Post Termination ..............................................12
ɀ 90° PCB Selection Guide ...............................................14
D*M Solder Termination (Machined) — Standard Footprint .318
ɍ
or .283
ɍɍ
inch . . .16
ZED* Solder Termination (Stamped) — Standard Footprint .318 inch ..............18
D* Solder Termination (Machined) — European Footprint 10,2
ɍ
or 9,4
ɍɍ
mm......20
ZD* Solder Termination (Stamped) — European Footprint 10,2 mm ...............28
ɀ Cable Selection Guide .................................................30
D Solder Cup Solder Termination (Machined) with Tin Shells ....................32
ZD* Solder Cup Solder Termination (Stamped) with Tin Shells ...................34
D*A Crimp Connectors without Contacts ...................................36
D*W Discrete Wire IDC ................................................38
Special Application D Subminiature Connectors
ɀ Combo D
Selection Index..............................................42
Combo D
PCB Connectors with 75 Ohm Coaxial Contacts (50 Ohm Option) ........44
Combo D
PCB Connectors with High Power ................................60
Combo D
PCB Connectors with (Size 20) Signal Contacts Only..................74
Combo D
Cable Solder Cup ............................................78
Combo D
Cable Crimp Connectors and Shield Cans ..........................80
Loose Contacts and Tooling.............................................83
ɀ Commercial Micro D Selection Index ......................................96
MDSM Connectors and Tooling ..........................................98
ɀ Filter D Selection Index................................................104
Product Performance .................................................106
D*JK PCB Connectors ................................................108
D*JT Solder Cup and Combo High Power Connectors.........................122
High Reliability D Subminiature Connectors
ɀ Military/High Reliability Selection Index....................................130
PCB 90°, Straight, Wrap Post, and Cable Solder Cup .........................132
24308-Style Cross References and Test Data ..............................142
Military/High Reliability Combo D
.......................................146
ɀ
SNASA/GSFC & ESA-SCC Cross References.
.............................
195
Accessories Selection Guide ..............................................198
Backshells.........................................................200
Locking Hardware ...................................................208
Miscellaneous ......................................................214
Reader’s Resource Selection Index .........................................219
Dimensional Reference Data............................................220
Lease Tooling ......................................................275
Glossary of Terms ...................................................276
Obsolete Products/Available Products Not Previously Listed....................282
Part Number Index ...................................................283
Product Safety and Warranty ...........................................297
Combo D
is a registered trademark of ITT Cannon in the United States.
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
The ITT Cannon
D Subminiature family of
connectors has grown to
include a wide variety of styles,
options and accessories and is
often the most economical
solution to any interconnect
problem. Ideally suited for
both commercial/industrial
applications and military/
aerospace applications,
ITT Cannon D Subminiature
connectors have found
worldwide acceptance in a
multitude of applications
ranging from office equipment
to satellites.
On the Cover ្
Filter D, Combo D
,
Commercial Micro D
(MDSM), Pressfit D,
and Standard D
Our facility is not
currently certified by
the DLA and this
product is not covered
by the QPL/QML.
Dimensions are shown in mm (inch)
Dimensions subject to change
2
D* - Wrap Post Termination
See pages 12-13.
Product Features
ɀ High performance commercial class
connectors
ɀ Two contact lengths for 2 or 3 wraps
ɀ Machined contacts
D* straight connectors are available for high
performance uses according to DIN 41652.
Contacts available in two popular lengths.
ZD* - Straight Solder Termination (Stamped)
See pages 8-9.
Product Features
ɀ Stamped contacts with 5 A current capacity
ɀ Economical
ɀ Optional vertical standoffs with optional
harpoon style boardlocks or screw locks
ZD* straight connectors are available for
applications where price is the primary driver. They
are available with or without boardlocks and screw
locks.
D Subminiature Straight PCB Selection Guide
D*NG - Straight Pressfit Termination
The D*NG is based upon the specification
CECC75-301-802. These connectors provide a
low-cost alternative to traditional through hole
solder contacts. Utilizing stamped ‘‘Eye of the
Needle’’ compliant contact tails per IEC-352-5, the
parts are quickly and easily mounted onto PCBs
without soldering, crimping or specialized tooling.
The socket contact engaging area utilizes a
‘‘spoon’’ shape with four points of
interconnection. Hardware options provide
flexibility and ensure that the final product fits the
electrical requirements of any application.
Product Features
ɀ Quick and easy press-in installation without
specialized tooling
ɀ ‘‘Spoon’’ socket contact provides improved
interface compared to ‘‘Tuning Fork’’
ɀ Closed-entry socket for secure blind mating
ɀ Front-shell only design based on
CECC 75-301-802
ɀ ‘‘Eye of the Needle’’ compliant contact tails
ɀ Press-in bolt for ground continuity
ɀ #4-40 UNC and M3 hardware options
See pages 4-5.
D*M Straight Solder Termination (Machined) — Standard PC Tails
See pages 6-7.
Product Features
ɀ 7.5 A current capacity
ɀ Machined contacts
ɀ 2 contact finishes
ɀ Optional vertical standoffs, screw locks, and
boardlocks (4 prongs)
ɀ UL file number E8572
ɀ Dimensionally compatible with Combo D
D*M straight PCB connectors, which are
designed to be equivalent to MIL-C-24308
(except for finishes) for printed circuit boards
and backplanes in demanding applications.
Additional contact lengths, hardware and
finish options available; consult factory for
details.
D* - Straight Solder Termination (Machined) — European PC Tails
See pages 10-11.
Product Features
ɀ High performance commercial connectors
ɀ Two contact finish performance classes
ɀ Optional vertical standoffs, threaded inserts
and pushfits/boardlocks
ɀ OL2 contact length, other lengths available
ɀ Tin plated contact PC tails (pin & socket)
ɀ Machined contacts
D* straight connectors are available for high
performance uses according to DIN 41652.
Available with European length OL contacts.
Select contact finish from 2 performance classes.