©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 1, 2020
Electrical Specifications
Impedance 50 ohm
Operating Frequency Band 3400 – 3800 MHz
Total Input Power, maximum 400 W @ 50 °C
Remote Electrical Tilt (RET) Information, Electrical
Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Internal RET High band (1)
Electrical Specifications
Frequency Band, MHz 3400–3600 3600–3800
Gain, dBi 15.4 15.7
Beamwidth, Horizontal, degrees 96 84
Beamwidth, Vertical, degrees 6.7 6.3
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 18 17
Front-to-Back Ratio at 180°, dB 28 27
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 25 25
Isolation, Inter-band, dB 19 19
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -140 -140
Input Power per Port at 50°C, maximum, watts 75 75
Electrical Specifications, BASTA
Frequency Band, MHz 3400–3600 3600–3800
Gain by all Beam Tilts, average, dBi 14.7 15.1
Gain by all Beam Tilts Tolerance, dB ±0.8 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 14.5
7 ° | 14.9
12 ° | 14.8
2 ° | 15.0
7 ° | 15.3
12 ° | 15.1