Low On-Resistance, Low Voltage,
SGM3001/SGM3002 SPDT Analog Switch
2
JANUARY 2013
SG Micro Corp
www.sg-micro.com
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
TEMPERATURE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM3001 SC70-6
-40℃ to +125℃
SGM3001XC6/TR 3001 Tape and Reel, 3000
SGM3002 MSOP-10
-40℃ to +125℃
SGM3002XMS/TR
XMS
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
V
+
to GND ............................................................ -0.3V to 6V
Analog, Digital Voltage Range
(1)
............ -0.3V to (V
+
) + 0.3V
Continuous Current NO, NC, or COM ....................... ±150mA
Peak Current NO, NC, or COM ................................. ±250mA
Package Thermal Resistance @ T
A
= +25℃
SC70-6, θ
JA
.............................................................. 333℃/W
MSOP-10, θ
JA
.......................................................... 205℃/W
Junction Temperature ................................................. +150℃
Storage Temperature Range ........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................ +260℃
ESD Susceptibility
HBM ............................................................................. 2000V
MM ................................................................................. 400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ..................... -40℃ to +125℃
NOTE:
1. Signals on NC, NO, or COM or IN exceeding V
+
will be
clamped by internal diodes. Limit forward diode current to
maximum current ratings.
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure
to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section
is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure
to observe proper handling
and installation procedures
can cause damage. ESD damage can range from subtle
performance
degradation to
complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit
design, or specifications
without prior notice.