SGM2553 Precision Adjustable Current
SGM2553D Limited Power Distribution Switches
2
JUNE 2018
SG Micro Corp
www.sg-micro.com
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
TEMPERATURE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM2553
SOT-23-6
-40℃ to +85℃
SGM2553YN6G/TR SJ7XX Tape and Reel, 3000
TDFN-2×2-6L
-40℃ to +85℃
SGM2553YTDI6G/TR
Tape and Reel, 3000
SGM2553D
SOT-23-6
-40℃ to +85℃
SGM2553DYN6G/TR SJ8XX Tape and Reel, 3000
TDFN-2×2-6L
-40℃ to +85℃
SGM2553DYTDI6G/TR
Tape and Reel, 3000
MARKING INFORMATION
NOTE: XX = Date Code. XXXX = Date Code.
-23-6
DFN-2×2-6L
Date Code - Year
Date Code - Month
Serial Number
YYY X X
Date Code
- Week
Date Code
- Y
ear
X XX X
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
VIN, VOUT, EN, ILIM and
to GND ......... -0.3V to 6V
Continuous Output Current ......................... Internally Limited
Continuous
Sink Current ................................ 25mA
ILIM Source Current ....................................................... 1mA
Package Thermal Resistance
TDFN-2×2-6L, θ
JA
.................................................... 160℃/W
SOT-23-6, θ
JA
.......................................................... 260℃/W
Junction Temperature ................................................. +150℃
Storage Temperature Range ......................... -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................ +260℃
ESD Susceptibility
HBM ............................................................................. 2000V
MM ................................................................................. 200V
RECOMMENDED OPERATING CONDITIONS
Input Voltage Range ........................................... 2.5V to 5.5V
Enable Voltage Range ........................................... 0V to 5.5V
Continuous Output Current Range ........................ 0A to 1.5A
Current Limit Threshold Resistor Range ........ 20kΩ to 387kΩ
Continuous
Sink Current Range .......... 0mA to 10mA
Minimum Input Decoupling Capacitance ...................... 0.1μF
Operating Temperature Range ...................... -40℃ to +85℃
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure
to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section
is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure
to observe proper handling
and installation procedures
can cause damage. ESD damage can range from subtle
performance
degradation to
complete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit
design, or specifications
without prior notice.