High level of performance and low cost

with VLT® AQUA Drive FC 202

Fact Sheet

Optimised drive for AC motor driven

water and wastewater applications.

User friendly setup makes instal-

lation easy and enables owners to

reach the highest level of perfor-

mance and lowest cost of ownership.

the user friendly dialogue based Smart

Start and a quick menu which is provid-

ing direct access to the most important

features for water and pump applica-

tions. By collecting the most important

water and pump parameters in one

place, the risk of incorrect configuration

is reduced significantly.

Instantly benefit from high efficiency,

fast payback and the lowest overall cost

3 x 380 – 480 V AC .............. 0.37 – 1000 kW

3 x 525 – 600 V AC ....................0.75 – 90 kW

3 x 525 – 690 V AC ................11 – 1400 kW*

*Up to 2000 kW available on request

Feature Benefit

Dedicated features

Dry run detection Protects the pump

Flow compensation function Saves energy

2 step ramps (initial/final ramp)

and min. speed monitor

Sleep Mode and no/low flow detection Save energy and protect the pump

End of pump-curve detection Pump protection, leakage detection

Pump cascade controller Saves energy and reduces equipment cost

Built-in Smart Logic Controller Often makes PLC omissible

Deragging Preventive/reactive pump cleaning

Back-channel cooling for frame D, E and F Prolonged lifetime of electronics

Pre/Post Lubrication System and pump protection

Free programmable infos/warnings/alerts

Perfect system integration and adaptation

to the application

IP 00 – IP 66 enclosures (depending on power size) Choose the protection class you need

All power sizes available in IP 54/55 enclosures Broad usability in standard enclosure

Password protection Reliable operation

Mains disconnect switch No need for external switch

Optional, built-in RFI suppression No need for external modules

One Wire safe stop Safe operation/less wiring

Max. ambient temperature up to 50°C

without derating (D-frame 45°C)

Reduced need for cooling

User-friendly Save initial and operation cost

30%

cost reduction in 1

st

year compared with

next best alternative

Application options

n VLT® Sensor Input MCB 114

Coated PCB available

Standard 3C2 for harsh environments

according to levels in IEC61721-3-3,

optional 3C3. From 90 kW 3C3 coating

is standard.

Relay & Analogue I/O option

n VLT® Relay Card MCB 105

n VLT® Analog I/O MCB109)

High power options

See the VLT® High Power Drive

Selection Guide for a complete list.

Power options

n VLT® Sine Wave Filter (LC filter)

PC software tool

n VLT® Motion Control Tool MCT 10

n VLT® Energy Box

n VLT® Motion Control Tool MCT 31

Specifications

Mains supply (L1, L2, L3)

Supply voltage

Supply frequency 50/60 Hz

Displacement Power Factor (cos φ) near unity (> 0.98)

True power factor (λ) ≥ 0.9

Switching on input supply L1, L2, L3 1-2 times/min.

Output data (U, V,W)

Output voltage 0 – 100% of supply

Switching on output Unlimited

Ramp times 0.1 – 3600 sec.

Max. output frequency 590 Hz

Note: VLT® AQUA Drive can provide 110%, 150% or 160% current for 1 minute, dependent on power size and

Analogue inputs

Number of analogue inputs 2

Modes Voltage or current

Voltage level -10 to +10 V (scaleable)

Current level 0/4 to 20 mA (scaleable)

Pulse inputs

Programmable pulse inputs 2

Voltage level 0 – 24 V DC (PNP positive logic)

Pulse input accuracy (0.1 – 1 kHz) Max. error: 0.1% of full scale

* Two of the digital inputs can be used for pulse inputs.