The PLUS+1
®
Connect CS100 Cellular Gateway offers
machine owners and operators powerful and highly
flexible data and position logging.
The CS100 provides high quality, plug and perform
ease of installation, and cost effective solutions to fit
the remote monitoring needs of today’s mobile
machines.
Product highlights
The CS100 includes LTE Cat M1 and 2G cellular
communications, GNSS positioning, 2 multifunction
I/O, Power Management Port and 2 CAN bus ports.
The CS100 is configured and managed from the PLUS
+1
®
Connect portal.
Remote machine monitoring
From the PLUS+1
®
Connect portal, the CS100 can be
remotely configured to monitor the machine state,
performance, and position. Both position and
machine data are periodically transmitted and stored
to the PLUS+1
®
Connect portal.
Features
•
Easy to install enclosure
•
Plug and perform solution
•
LTE Cat M1 and 2G cellular
•
PLUS+1
®
Connect portal to configure
logging of machine and position data
•
Firmware-over-the-air (FOTA) update
•
Internal cellular and GNSS antennas
•
Factory-installed SIM Card
•
2 CAN buses 2.0A/B
•
IP67 (with connector mated)
•
2 multifunction I/O
•
Power management driven by CL15
including low-power mode with cyclic
configurable wake-up
•
Flexible mounting options
•
GNSS position tracking
•
Factory-installed security certificate
•
Internal non-volatile memory allows
stored Data Logging for:
‒
CAN messages
‒
GNSS position
‒
Internal variables
Comprehensive technical literature is
online at www.danfoss.com
Data Sheet
PLUS+1
®
Connect
CS100 Cellular Gateway
©
Danfoss | January 2021 AI294265575942en-000102 | 1
CS100 dimensions in mm [in]
177.70 [7.00]
162.00 [6.38]
86.10
[3.40]
71.00
[2.80]
30.42
[1.20]
40.90 [1.61]
2 X Ø 6.3 THRU
9.30 [0.37]
36.0 [1.42]
17.5 [0.69]
23.0 [0.1]
C
Caution
Warranty will be voided if device is opened.
Device is not field serviceable. Do not open the device.
Power supply/ CAN bus/ I/O connector
Pin Designation Color Description
1 Ground Black Power Supply
2 9 to 36 Vdc Red Power Supply
3 CAN 1 high Yellow CAN bus 1
4 CAN 1 low Green CAN bus 1
5 MFIO1/CL15 Brown Multifunction IO/Ignition
6 MFIO2 Orange Multifunction IO
7 CAN 2 high Yellow/White CAN bus 2
8 CAN 2 low Green/White CAN bus 2
Device and part number
CS100 IoT Gateway 11230826
Related product and part numbers
DEUTSCH mating connector bag assembly
K29620
(16-20 AWG)
Electrical data
DC supply voltage 9 to 36 Vdc
Memory buffering capacity 16 MB
EMI/RFI rating 100 V/m
Mechanical data
Dimension L x W x D 177 x 86 x 41 mm
Housing Tamper resistant
Color Black
Operating temperature -40 to 75°C [-40 to 167°F]
Storage temperature -40 to 85°C [-40 to 185°F]
IP rating
IP67 (with connector mated)
IP69k (when top mounted and with
connector plugged in or suitably
capped)
Weight 250 grams
Status LED 1 Multi-color
Interface/Protocol/Certification
CAN bus network 2 (ISO 11898-2 High Speed, 2.0A/B)
Multifunction Input/Output 2 (DIN/AIN/ResIN/FreqIN/CrntIN/
CL15/DOUT)
Radio Module LTE Cat M1 and 2G cellular
Cat M1 Throughput (UL/DL) Max 375 kbps / Max 375 kbps
2G-EGPRS Throughput (UL/DL) Max 236.8 kbps / Max 296 kbps
Cat M1 LTE FDD Bands B1/B2/B3/B4/B5/B8/B12/B13/B18/B19
/B20/B26/B28
2G – EGPRS Bands 850/900/1800/1900 MHz
GNSS Constellations GPS, GLONASS, BeiDou, Galileo
Antennas Cellular and GNSS (Internal)
SIM Card Factory Installed
Certifications PTCRB, RED, CE, E-Mark
Vibrations IEC 60068-2-64
Shock IEC 60068-2-27 test Ea
System tools
Software PLUS+1
®
Connect
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 |
©
Danfoss | January 2021 AI294265575942en-000102