1
Owner’s Manual
SmartRack
™
High-Capacity
Horizontal Cable Manager
Models: SRCABLEDUCT1UHD & SRCABLEDUCT2UHD
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2011 Tripp Lite. All rights reserved. SmartRack is a trademark of Tripp Lite.
Introduction
SRCABLEDUCT Horizontal Cable Managers route patch cables horizontally at the front or the rear of a
standard 19-in. rack. Their plastic fingers allow patch cords to enter and exit in an organized manner.
Included Hardware
Rack Enclosure & 4-Post Rack Mounting:
• 4xM6CageNuts
• 4xM6CupWashers
• 4xM6Screws
2-Post Rack Mounting:
• 4x#12CupWashers
• 4x#12-24Screws
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
201105050 93-3109.indd 1 6/13/2011 10:52:46 AM
2
Note: The following diagrams show the SRCABLEDUCT2UHD being installed in a rack enclosure. SRCABLEDUCT1UHD
uses the same procedure, but the cage nuts will be installed with 1U rack spaces between them rather than 2U. Both the
1U and 2U units can also be installed in a 2-post or 4-post rack in the same manner, but 12-24 hardware will be used for
2-post mounting.
Installation
1
Install the cage nuts in the desired location
in the rack horizontally using a cage nut tool
(user-supplied).
2
Attach the cable manager to the rack by
tightening the included screws and washers
into the cage nuts.
1
2
Compete (Front) Complete (Back)
201105050 93-3109.indd 2 6/13/2011 10:53:06 AM