2x2 HDMI over Cat5/6 Matrix/Extender Kit - 1080p
60 Hz, RS-232, IR Control, 656 ft. (200 m), TAA
MODEL NUMBER: B160-202-HDSI
Converts HDMI A/V to an IP-based signal that is transmitted through a managed switch to 2 HDMI
displays 656 ft. away via Cat5e/6 cable.
Features
DVI/HDMI Matrix Kit for Digital Signage or Extending Video in Schools or Trade Show Booths
This matrix/extender kit comes with two Tripp Lite B160-001-HDSI transmitters and two B160-100-HDSI
receivers. It extends and distributes DVI or HDMI audio/video, RS-232 serial and IR (infrared) remote
signals from two source devices, such as Blu-ray players and media servers, to two HDMI displays via
Cat5e/6 cabling. The maximum distance between a transmitter and receiver is 328-ft. (99.97 m). However,
by connecting a dedicated network switch (sold separately) in between, you can extend the audio/video as
far as 656 feet (200 meters).
Scale Up to a Multi-In, Multi-Out Installation to Take You Beyond 656 Feet
You can create an installation featuring multiple sources and displays by connecting a dedicated managed
Ethernet network switch with Internet Group Management Protocol (IGMP), such as Tripp Lite's NSS-
G16D2. By adding multiple managed switches, you can create a multi-in, multi-out installation with as
many as 64 transmitters and 255 receivers. The IGMP-enabled switch will let you manage all connections
for centralized control over which sources show on which displays. Note: Unmanaged switch installations
are limited to two transmitter units. The number of receivers is limited to the number of ports remaining on
the unmanaged switch. This transmitter/receiver extender kit is designed for use with a dedicated network
switch. Connecting a switch used with other networking equipment will result in degraded or non-
functional performance.
Transmits Crystal-Clear 1080p Video with Stereo Audio
The B160-202-HDSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz with 24-bit True Color
in a managed switch installation. It extends IR signals that control a DVI or HDMI source to the remote
displays, as well as RS-232 signals at serial baud rates up to 57600 bps. This allows you to operate the
source devices' remote controls (play, rewind, pause, etc.), while standing near a receiver located up to
656 feet away. Adapter cables are included for converting DVI signals to HDMI and vice versa.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting
hardware is included for installing the units on walls, poles or 19-inch racks. Cat6 patch cable (such as
Tripp Lite's N202-Series) can be used to connect the transmitters to a receiver or network switch. Connect
an additional display to a transmitter's local output with HDMI cable (such as Tripp Lite's P568- or P569-
Series) to monitor the image being transmitted to a remote display.
Highlights
Matrix kit includes 2 B160-001-
HDSI transmitters and 2 B160-
100-HDSI receivers
●
Delivers HD picture quality at
resolutions up to 1920 x 1080
(1080p) @ 60 Hz
●
Transmitters’ local HDMI ports
let you monitor images being
shown on remote displays
●
Plug-and-play operation with no
software required for easy,
immediate installation
●
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
●
Applications
Keep your video sources in a
secure location, with displays
located elsewhere for viewing by
the intended audience
●
Create an easily updatable
video board communicating
dynamic information, such as a
restaurant menu or a theater
schedule
●
Display arrivals, departures and
up-to-the-minute information in
an airport or train station
●
Duplicate audio/video content
across multiple displays, show
different content on multiple
screens or create an impressive
video wall made up of many
monitors (multiple transmitters
and receivers required)
●
System Requirements
Source devices with DVI or
HDMI output (media server, Blu-
ray player)
●
Display devices with DVI or
HDMI input (HDTV, projector,
monitor)
●
Package Includes
(2) B160-001-HDSI transmitter
units
●
(2) B160-100-HDSI receiver
units
●
(2) IR-Out cable
●
(2) IR-In cables
●
(4) HDMI to DVI adapter cables
●
1 / 5
Specifications
TAA-Compliant for GSA Schedule Purchases
The B160-202-HDSI is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible
for GSA (General Services Administration) Schedule and other federal procurement contracts.
(4) 3.5 mm to DB9 adapter
cables (M/F)
●
(4) External power supplies with
4.5-ft. (1.37 m) cord (Input: 100-
240V, 50/60 Hz, 1A; Output: 5V
2A)
●
(16) International plug adapters
(North America, Europe, U.K.,
Australia)
●
(4) Sets of mounting hardware
●
(4) Owner's manuals
●
OVERVIEW
UPC Code 037332236043
Product Type Extender Kit
Technology DVI; HDMI; IR; A/V over IP; Cat5/5e; Cat6
VIDEO
Max Supported Video Resolution 1920x1080 (1080p @ 60Hz)
Max 1280 x 720 (720p) Range (ft) 328
Max 1920 x 1080 (1080p) Range (ft) 328
Transmitter Video Input HDMI
Transmitter - Number of Video
Outputs
2
Transmitter - Local Display Output HDMI
Receiver/Transceiver Video Output HDMI
Receiver - Number of Video Outputs 1
Range Extension using other Tripp
Lite product
328ft
Recommended Cabling N202-Series Cat6 Patch Cable
Other Tripp Lite product used to
extend range
network switch
Max Supported Color Depth 24-bit True Color
HDR Support No
3D Video Supported Yes
Maximum Signal Range (ft) 328
Maximum Signal Range (m) 100
Maximum Signal Range Details 328 ft via Cat6275 ft via Cat5e
2 / 5