Ceramic Capacitor Technology  CeraLink

15,815,8 0,00

Product Marketing PI AE/IE  06/21  2

CeraLink in a shot - optimized for conditions

under operation in power electronics

Use CeraLink when

● Space requirement is tight

● Temperature is demanding (+150 °C)

● High current rating is vital

● Requirements for capacitance density are tough

● High switching frequencies are applied (SiC, GaN)

Main Application

● Snubber capacitor

● DC-Link capacitor

● Filter capacitor

CeraLink technology supports

● Increasing capacitance with DC bias and best in class

capacitance density at operating point (V

+ T

)

● High current capability due to low losses at high frequencies

(up to several MHz) and high temperatures (up to +150 °C)

● No limitation of dV/dt

● Good self-regulating properties

● Qualification based on AEC-Q200 rev. D

Main Application

Measurement condition

Film

capacitor

Class 2

MLCC

CeraLink

Typical capacitance density

@ DC link voltage, 20 V

RMS

, 25°C

0.7 µF/cm³ 2.5 µF/cm³ 4.9 µF/cm³

Typical current rating

per capacitance @ 100 kHz, 105°C

< 1 A/µF < 4.5 A/µF 11 A/µF

Full Performance

Potential