GreenFET
Ultra-Low RDS
ON
Load Switch Selector Guide
For more information please visit www.dialog-semiconductor.com
Or email your questions to cmic@diasemi.com
Q4 2020
Dialog Semiconductor Inc.
2560 Mission College Boulevard
Suite 110, Santa Clara
California 95054 USA
Dialog’s GreenFET family of high-performance load switches are designed and optimized for all high-side power rail control applications from
0.25 V to 5.5 V where the load currents range from 1 A to 9 A. Using Dialog’s proprietary MOSFET design, all GreenFET load switches achieve ultra-stable
RDS
ON
across wide input and supply voltage ranges. Combining Dialog's proprietary MOSFET IP and advanced assembly techniques, these advanced state-
of-the-art products are available in ultra-small pcb footprints from 0.56 mm
2
to 4 mm
2
and exhibit low thermal resistances for high-current operation.
Compared to discrete GreenFET circuit implementations, Dialog’s GreenFET products combine high-performance nFET or pFET structures, high-current
handling capability, charge pumps, as well as multiple protection and control circuits into space-efficient single-and dual-channel products. The combination
of all these advanced features directly results in BOM (bill-of-material) component and cost reductions as well as increasing system reliability and reduced
board size.
All of Dialog’s GreenFET low-voltage load switches are designed and fully characterized over the commercial (0 °C to 70 °C), extended commercial (-20 °C
to 70 °C), industrial (-40 °C to 85 °C), or extended industrial (-40 °C to 125 °C) temperature range. Consistent with generating very low thermal gradients,
Dialog integrated power control switches are available in low thermal resistance, STDFN/STQFN RoHS-compliant packaging or wafer-level chip scale
packaging (WLCSP).
Key features in the GreenFET family of high-performance, integrated power control products include:
High-performance Low RDS
ON
nFET & pFET MOSFETs
From as low as 4 mΩ
Internal Protection Features:
Built-in Supply Undervoltage Lockout Protection
Fixed and Capacitor/Resistor-adjustable Inrush Current Control
Fixed and Resistor-adjustable Current Limit Protection
��� Built-in Short-circuit Current Protection
Built-in Thermal Shutdown Protection with Auto Restart
Reverse-current Blocking using Bulk Switch or Back-to-Back FETs
Reverse-voltage Detection (selected part numbers)
Fast VOUT Discharge (VOUT Discharge delete options available)
Active HIGH ON-OFF Control (Active-LOW ON-OFF control available)
Open-drain FAULT Signaling (selected part numbers)
Open-drain Power Good Signaling (selected part numbers)
Wafer-level Chip-scale Packaging (selected part numbers)
UL2367 Certified (selected part numbers)
Applications:
Smartphones and Fitness Bands
Notebook and Tablet PCs
Enterprise Networking
Enterprise Multifunction Copiers/Printers
Enterprise Computing
Set-top Boxes
HDDs and SSDs
PCIe/PCI Adapter Cards
Portable Consumer Electronics
General-purpose, High-side Power-Rail
Switching/Control
GreenFET
Ultra-Low RDS
ON
Load Switch Selector Guide
For more information please visit www.dialog-semiconductor.com
Or email your questions to cmic@diasemi.com
Q4 2020
Dialog Semiconductor Inc.
2560 Mission College Boulevard
Suite 110, Santa Clara
California 95054 USA
Single N-Channel Load Switches
Part Number
Description
RDS
ON
(mΩ)
V
D
/V
IN
Min (V)
V
D
/V
IN
Max (V)
Power Supply
(V
DD
) Voltage
Range (V)
Output
Voltage Slew
Rate set by
Protection
Features*
Current/
Power
Monitor
Output
Power
Good,
FAULT
indicator
Output
Discharge
Circuit
Operating
Temperature
Range, (°C)
Package
Size (mm)
SLG59M1717V
4 mm², integrated power switch with charge pump, ramp
control, output discharge, protection, and PG signal
output
4
0.8
V
DD
2.5 - 5.5
Capacitor
UVLO,
ACL(R), SCL,
TSD
No
PG
Yes
-40 to +85
STQFN-16
(1.6 x 2.5)
SLG59M1709V
4 mm², integrated power switch with charge pump, ramp
control, and protection
4
0.8
V
DD
2.5 - 5.5
Capacitor
UVLO, ACL,
SCL, TSD
No
No
No
-40 to +85
STQFN-16
(1.6 x 2.5)
SLG59M1710V
4 mm², integrated power switch with charge pump, ramp
control, and protection
4
0.8
V
DD
2.5 - 5.5
Capacitor
UVLO, ACL,
SCL, TSD
No
No
No
-40 to +85
STQFN-16
(1.6 x 2.5)
SLG59M1713V
4 mm², integrated power switch with charge pump, ramp
control, output discharge, and protection
4
0.8
V
DD
2.5 - 5.5
Capacitor
UVLO, ACL,
SCL, TSD
No
No
Yes
-40 to +85
STQFN-16
(1.6 x 2.5)
SLG59M1568V
3 mm² integrated power switch with charge pump, ramp
control, output discharge, and protection
7.3
1.0
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
STDFN-14
(1.0 x 3.0)
SLG59M1456V
3 mm² integrated power switch with charge pump, ramp
control, output discharge, and protection
7.8
1.0
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-20 to +70
TDFN-8
(1.5 x 2.0)
SLG59M1457V
3 mm² integrated power switch with charge pump, output
discharge, and protection
7.8
0.85
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
TDFN-8
(1.5 x 2.0)
SLG59M1496V
3 mm² integrated power switch with charge pump, ramp
control, output discharge, and protection
7.8
0.85
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
TDFN-8
(1.5 x 2.0)
SLG59M1600V
3 mm² integrated power switch with reverse-current
blocking, charge pump, ramp control, output discharge,
and protection
7.8
0.85
V
DD
2.5 - 5.5
Capacitor
TSD, RCB
No
No
Yes
-40 to +85
STDFN-14
(1.0 x 3.0)
SLG59M1655V
3 mm², integrated power switch with reverse-current
blocking, charge pump, ramp control and protection
7.8
0.85
V
DD
2.5 - 5.5
Capacitor
TSD, RCB
No
No
No
-40 to +85
STDFN-14
(1.0 x 3.0)
SLG59M301V
3 mm² integrated power switch with charge pump, ramp
control, output discharge, and protection
8.5
0.85
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
STDFN-14
(1.0 x 3.0)
SLG59M307V
3 mm² integrated power switch with charge pump, ramp
control, and output discharge
7.8
0.85
V
DD
1.5 - 5.5
Capacitor
No
No
No
Yes
-20 to +85
TDFN-8
(1.5 x 2.0)
SLG59M308V
3 mm² integrated power switch with charge pump, ramp
control, output discharge, and protection
7.8
1.0
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +70
TDFN-8
(1.5 x 2.0)
SLG59M309V
3 mm² integrated power switch with charge pump, ramp
control, and protection
7.8
1.0
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
No
-40 to +85
TDFN-8
(1.5 x 2.0)
SLG59M1657V
3 mm², integrated power switch with charge pump, ramp
control, and protection
8.4
0.9
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
No
-40 to +125
TDFN-8
(1.5 x 2.0)
SLG59M1614V
3 mm² integrated power switch with charge pump, ramp
control, and output discharge
8.5
0.85
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
TDFN-8
(1.5 x 2.0)
GreenFET
Ultra-Low RDS
ON
Load Switch Selector Guide
For more information please visit www.dialog-semiconductor.com
Or email your questions to cmic@diasemi.com
Q4 2020
Dialog Semiconductor Inc.
2560 Mission College Boulevard
Suite 110, Santa Clara
California 95054 USA
Single N-Channel Load Switches (continued)
Part Number
Description
Max I
DS
(A)
RDS
ON
(mΩ)
V
D
/V
IN
Min (V)
V
D
/V
IN
Max (V)
Power Supply
(V
DD
) Voltage
Range (V)
Output
Voltage Slew
Rate set by
Protection
Features*
Current/
Power
Monitor
Output
Power
Good,
FAULT
indicator
Output
Discharge
Circuit
Operating
Temperature
Range, (°C)
Package
Size (mm)
SLG59M1470V
3 mm² fast turn on, nano-power current consumption
integrated power switch
6
9.8
0.85
V
DD
1.5 V
3.0 - 5.25
No
No
No
No
Yes
-40 to +85
TDFN-9
(1.5 x 2.0)
SLG59M1685C
0.82 mm² integrated power switch with charge pump,
ramp control, output discharge, and protection
2
10
1.3
3.6
-
Internally
Fixed
UVLO, ACL,
SCL, TSD
No
No
Yes
-40 to +85
WLCSP-6L
(0.71 x 1.16)
SLG59M1735C
1.5 mm² integrated power switch with charge pump,
ramp control, and protection
4
10.5
0.9
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
No
-40 to +85
WLCSP-8
(0.96 x 1.56)
SLG59M1707V
4 mm², integrated power switch with charge pump,
IDS current monitor output, output discharge, and
protection
3.5
13
0.8
V
DD
2.5 - 5.5
Internally
Fixed
UVLO,
ACL(R), SCL,
TSD
Current
FAULT
Yes
-40 to +125
STQFN-16
(1.6 x 2.5)
SLG59M1571V
1 mm², low-voltage integrated power switch with
reverse-current blocking, charge pump, output
discharge, protection, and 4-pin package
1
14.6
0.85
1.9
-
No
TSD, RCB
No
No
Yes
-40 to +85
STDFN-4
(1.0 x 1.0)
SLG59M1714V
4 mm², integrated power switch with reverse-current
blocking, charge pump, IDS current monitor output,
output discharge, and protection
4
15
0.8
V
DD
2.5 - 5.5
Internally
Fixed
UVLO,
ACL(R), SCL,
TSD, RCB
Current
FAULT
Yes
-40 to +85
STQFN-16
(1.6 x 2.5)
SLG59M1551V
1 mm², low voltage integrated power switch with
charge pump, output discharge, protection, and 4-pin
package
2
15.5
0.85
1.9
-
No
TSD
No
No
Yes
-40 to +85
STDFN-4
(1.0 x 1.0)
SLG59M1556V
1 mm², low voltage integrated power switch with
charge pump, protection, and 4-pin package
2
15.5
0.85
1.9
-
No
TSD
No
No
No
-40 to +85
STDFN-4
(1.0 x 1.0)
SLG59M1658V
1.6 mm², integrated power switch with charge pump,
ramp control, output discharge, and protection
2.5
17
0.9
V
DD
2.5 - 5.5
Capacitor
UVLO, ACL,
SCL, TSD
No
No
Yes
-40 to +125
STDFN-8
(1.0 x 1.6)
SLG59M1448V
1.6 mm² integrated power switch with charge pump,
ramp control, output discharge, and protection
2.5
17
0.9
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
STDFN-8
(1.0 x 1.6)
SLG59M1545V
1.6 mm² integrated power switch with charge pump,
ramp control, and protection
2.5
17
0.85
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
No
-20 to +70
STDFN-8
(1.0 x 1.6)
SLG59M1598V
1.6 mm² integrated power switch with charge pump,
ramp control, output discharge, and protection
2.5
17
0.85
V
DD
2.5 - 5.5
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
STDFN-8
(1.0 x 1.6)
SLG59M1746C
0.82 mm² integrated power switch with output
discharge
1
17.6
0.25
1.5
2.7 - 3.6
Internally
Fixed
No
No
No
Yes
-40 to +85
WLCSP-6L
(0.71 x 1.16)
SLG59M1742C
0.82 mm² integrated power switch with 550 us total on
time, and output discharge
1
18
0.25
1.5
2.7 - 3.6
Internally
Fixed
No
No
No
Yes
-40 to +85
WLCSP-6L
(0.71 x 1.16)
SLG59M1720V
1.4 mm², integrated power switch with charge pump,
ramp control, output discharge and protection
2
18
0.85
V
DD
2.5 - 3.6
Capacitor
ACL, SCL,
TSD
No
No
Yes
-40 to +85
STDFN-6
(1.0 x 1.4)