Page 1
www.sensata.com
Copyright © 2021 Sensata Technologies, Inc.
Type
Co-linear Dipole Array
Frequency Range
2300 - 2500 MHz
Impedance
50 ohm unbalanced
Gain
6 dBi
Max Power
20 Watts (CW) at 50°C
Beamwidth Horizontal
360 deg omni directional
3 dB Beamwidth Vertical
22 deg at 2242.5 MHz
Feed System
DC-Ground / Base
Connector
N type female
| WIRELESS ANTENNAE & ACCESSORIES
SPECIFICATIONS
A wide range of wireless and other antennae are available from Sensata,
including ATEX rated antennae for hazardous areas.
The ANTA7000 is typically used on the IWR-PORT and IWT-128 units
where they are mounted in non-metallic enclosures so transmission
through the panel is not a problem. The connections is an SMA male.
The ANT2401 is a high gain antenna suitable for mounting on the
outside of control panels or on internal or external walls. It has a high
power Teflon element protected by a glass fiber tube. Connection is via
an N-Type female connector.
The EX-ANT is optimized and certified for use in hazardous environments.
It has a wide angle beam providing excellent coverage in multi path
environments, for example where there are metal walls and equipment.
For a full listing of devices available or technical assistance in choosing
a suitable antenna please contact Sensata.
ANT2401 Technical
Features
Wide range of antennae, cables and connectors available
Including ATEX certified units
High-gain industrial hardened units
Cost-effective proven solutions
www.sensata.com
Page 2
Copyright © 2021 Sensata Technologies, Inc.
INSTALLATION
A7000 Characteristics
Frequency Range
2400MHz
Impedance
50ohm
Gain
2.14 dBi
Temperature
-30°C to +80°C
Polarization
Vertical
Emission
Omni Direction
Dimensions
53mm x 9.65mm
Connector
SMA Male RA
EX-ANT Characteristics
Frequency Range
2400 & 5000 MHz
Impedance
50 ohm
Gain
2 dBi
Temperature
-30°C to +60°C
Beamwidth Vertical
80°C
Beamwidth Horizontal
360°C
Max Input Power
2 Watts (Ex limitation)
Connector
10 meters cable
Weight
100g
Length
125mm
Radome Material
EX certified plastic
Wind Survival
>150mph
Mounting Method
Wall / mast adapter