3
Backplane optical modules and connectorsBackplane optical modules and connectors
Expanding on the successful LightCONEX
®
style A compatible with VITA 66.4 aperture, Reflex Photonics is launching its style
B and style C, both compatible with VITA 67.3 type C, D, and E standard apertures. These new LightCONEX active optical
blind mate interconnects are compatible with the upcoming VITA 66.5 standard and supported by the Sensor Open System
Architecture (SOSA™) consortium.
In addition, Reflex Photonics is launching a new generation of FMC boards. These new VITA 57.1 and 57.4 compliant Optical
FMC Boards offering up to 150 Gbps of full-duplex bandwidth data communication are based on latest generations FPGA’s
and can be used with all the FPGA front end processing boards.
LightCONEX backplanes
Backplane connector Face Plates accommodate
different VITA apertures and are mated to MT-termi-
nated optical cable(s) and MT ferrule(s).
• VITA 66.4
• VITA 67.3C, VITA 67.3D, and VITA 67.3E
LightCONEX plug-in modules
The plug-in module connectors are equipped with
optical transceivers that are either single active,
dual active/passive, or a combination of optical and
RF coaxial connectors.
LightCONEX backplane connector LightCONEX plug-in module connector
FMC boards
Optical FMC Boards offers up to 150 Gbps of full-
duplex bandwidth data communication.
• VITA 57.1 (HPC 400 pins): 10TRX
• VITA 57.4 (HSPC 560 pins): 10TRX, or 12TRX, or 24TX,
or 24RX
LightABLE LH FMC board LightABLE LL FMC board