EFM32PG22 Gecko MCU Family Data
Sheet
The EFM32PG22 Gecko family of microcontrollers is part of the
Series 2 Gecko portfolio. EFM32PG22 Gecko MCUs are ideal for
enabling energy-friendly embedded applications.
The highly efficient solution contains a 76.8 MHz Cortex-M33 with rich analog and com-
munication peripherals to provide an industry-leading, energy efficient MCU for consum-
er and industrial applications.
Gecko applications include:
KEY FEATURES
32-bit ARM® Cortex®-M33 core with 76.8
MHz maximum operating frequency
Up to 512 kB of flash and 32 kB of RAM
Low energy operation
26 uA/MHz (EM0)
1.10 uA sleep (EM2)
Secure Boot with Root of Trust and
Secure Loader (RTSL)
16-bit ADC with 16-channel scan
Personal Hygiene devices
Appliances and whitegoods
Industrial Automation
Consumer electronics
Timers and Triggers
32-bit bus
Peripheral Reflex System
Serial Interfaces I/O Ports
Analog I/F
Lowest power mode with peripheral operational:
USART
EUART
External
Interrupts
General
Purpose I/O
Pin Reset
Pin Wakeup
ADC
EM4—Shutoff
Energy Management
Brown-Out
Detector
Voltage
Regulator
Power-On
Reset
Security
Clock Management
HF Crystal
Oscillator
LF Crystal
Oscillator
Precision LF
RC Oscillator
HF
RC Oscillator
AES-128, AES-256,
SHA-1, SHA-2,
ECC
Ultra LF RC
Oscillator
Core / Memory
ARM Cortex
TM
M33 processor
with DSP, FPU and TrustZone
ETM Debug Interface RAM Memory
LDMA
Controller
Flash Program
Memory
Real Time
Capture Counter
Timer/Counter
Low Energy Timer Watchdog Timer
Protocol Timer
EM3—StopEM2—Deep SleepEM1—SleepEM0—Active
True Random Number
Generator
Fast Startup
RC Oscillator
Back-Up Real
Time Counter
I
2
C
PDM
DC-DC
Converter
Temperature
Sensor
Secure Boot RTSL
Secure Debug
silabs.com | Building a more connected world. Rev. 1.1
1. Feature List
The EFM32PG22 highlighted features are listed below.
Low Power MCU
High Performance 32-bit 76.8 MHz ARM Cortex
®
-M33 with
DSP instruction and floating-point unit for efficient signal
processing
Up to 512 kB flash program memory
Up to 32 kB RAM data memory
Low System Energy Consumption
26 μA/MHz in Active Mode (EM0) at 38.4 MHz
1.10 μA EM2 DeepSleep current (8 kB RAM retention and
RTC running from LFRCO)
0.95 μA EM3 DeepSleep current (8 kB RAM retention and
RTC running from ULFRCO)
0.17 μA EM4 current
Security Features
Secure Boot with Root of Trust and Secure Loader (RTSL)
Hardware Cryptographic Acceleration for AES128/256,
SHA-1, SHA-2 (up to 256-bit), ECC (up to 256-bit), ECDSA,
and ECDH
True Random Number Generator (TRNG) compliant with
NIST SP800-90 and AIS-31
ARM
®
TrustZone
®
Secure Debug with lock/unlock
Packages
QFN40 5 mm × 5 mm × 0.85 mm
QFN32 4 mm × 4 mm × 0.85 mm
Wide selection of MCU peripherals
Analog to Digital Converter (ADC)
12-bit @ 1 Msps
16-bit @ 76.9 ksps
Up to 26 General Purpose I/O pins with output state reten-
tion and asynchronous interrupts
8 Channel DMA Controller
12 Channel Peripheral Reflex System (PRS)
4 × 16-bit Timer/Counter with 3 Compare/Capture/PWM
channels
1 × 32-bit Timer/Counter with 3 Compare/Capture/PWM
channels
32-bit Real Time Counter
24-bit Low Energy Timer for waveform generation
1 × Watchdog Timer
2 × Universal Synchronous/Asynchronous Receiver/Trans-
mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I
2
S)
1 × Enhanced Universal Asynchronous Receiver/Transmit-
ter (EUART)
2 × I
2
C interface with SMBus support
Digital microphone interface (PDM)
Die temperature sensor with +/-1.5 °C accuracy after single-
point calibration
Wide Operating Range
1.71 V to 3.8 V single power supply
-40 °C to 125 °C
EFM32PG22 Gecko MCU Family Data Sheet
Feature List
silabs.com | Building a more connected world. Rev. 1.1 | 2