Compact67 CC-Link I/O Block – Classic M12

2 / 26

Perface

1. Scope of application of this manual:

2. Basic knowledge required:

3. Guide:

It’s for ELCO Compact67 distributed I/O device with CC-Link protocol. From the

information in the manual, you can operate the Compact67 module on the

CC-Link bus as a distributed I/O device connection controller (PLC, DCS, etc.).

This manual assumes that you have a basic knowledge of electrical and

automation engineering. This manual describes each component based on valid

data at the time of release. New components and parameter adjustments are

updated in the new manual.

This manual describes the hardware and use of the Compact67 distributed I/O

4. Technical support:

This manual describes the product features and usage of the Compact67 distributed

I/O device as fully as possible. If you have any questions or other questions about

this product, please contact your local ELCO office or call the service hotline at

400-608-4005. You can also find more automation products on the ELCO website:

hp://www.elco-holding.com.cn/

5. Liability exemption:

We have checked the consistency of the content and hardware and software described

in the manual. However, the possibility of deviation is not excluded, and the content

cannot be guaranteed to be completely consistent with the hardware and software.

The data parameters have been tested as required, and the necessary modifications

will be improved in the new version.

device under the CC-Link protocol. Coverage includes:

Installation and wiring

Debugging and diagnosis

Components

Ordering data

Technical parameters