1 of 5
PRODUCT SAFETY INFORMATION SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
TRADE NAME:
IsoClad
®
Series Laminates
CHEMICAL FAMILY: Pol
y
tetrafluoroeth
y
lene Composite
HMIS RATING: H 1 F 1
R
0
USE OF
A
RTICLE Printed Circuit Boards
DATE ISSUED:
A
u
g
us
t
23, 2021
COMPANY/UNDERTAKING
IDENTIFICATION:
Rogers Corporation
1100 Governor Lea Rd
Bear, DE 19701
Phone: 001-800-635-9333
Fax: 001-302-834-2940
Email: msdsinfo
@
ro
g
erscorporation.com
2. HAZARDS IDENTIFICATION
CLASSIFICATION OF THE
MATERIAL:
NE
LABELING REQUIREMENTS: NE
EFFECTS OF OVEREXPOSURE: None are expected with normal handling. Cutting and other finishing
operations may create dust. Ventilation and personnel protection should be
similar to all operations generating nuisance dust. Processing material at
temperatures exceedin
g
decomposition temperature ma
y
release toxic fumes.
INHALATION: Dust may cause respiratory irritation. Remove to fresh air and seek medical
attention if necessary. Exposure to copper fume or PTFE decomposition
products may cause symptoms of metal of Polymer Fume Fever. This is
characterized by flu like symptoms (fever, chills, muscle aches) that last 24
hours.
EYE CONTACT: Dust may cause irritation. Flush eyes with water and seek medical attention if
necessar
.
SKIN CONTACT: Dust ma
y
cause irritation. Wash thorou
g
hl
y
with soap and water.
INGESTION: None known.
CHRONIC:
NE
3. COMPOSITION/INFORMATION ON INGREDIENTS
This material is produced as an “article” as defined in 29 CFR 1910.1200 and REGULATION (EC) N° 1907/2006 is
therefore exempt from the Hazard Communication Standard and REACH. Since this material does not release and will
not result in exposure to a hazardous chemical under normal conditions of use, no Safet
y
Data Sheet is required.
2 of 5
Chemical Name CAS No. EINECS
/
ELINCS
% OSHA PEL ACGIH TLV
Polytetrafluoroethylene
9002-84-0 204-126-9 Varies NE NE
Fiberglass 65997-17-3 266-046-0 Varies 5 mg/m
3
(Resp. Dust)
1 f/cc
(Resp. Fibers)
Copper Foil (Dust) 7440-50-8 231-159-6 Varies 1 mg/m
3
1 mg/m
3
4. FIRST
-
AID MEASURES
INHALATION: Remove to fresh air. Obtain medical attention if s
y
mptoms persist.
EYE CONTACT: Flush eyes with large amounts of water for 15 to 20 minutes. Obtain medical
attention if s
y
mptoms persist.
SKIN CONTACT: Immediately take off all contaminated clothing and flush area with water for 15
to 20 minutes. Obtain medical attention if s
y
mptoms persist.
INGESTION: N
A
5. FIRE
-
FIGHTING MEASURES
FLASH POINT: NE
o
C
(
o
F
)
Flammable Limits: LEL N
A
UEL N
A
A
UTOIGNITION TEMPERATURE: NE
o
C
(
o
F
)
EXTINGUISHING MEDIA:
X
Water Spra
y
X
Foam
X
CO
2
X
Dr
y
Chemical
X
Other
–
SPECIAL FIRE FIGHTING
PROCEDURES:
Decomposition in a fire may produce toxic fumes. Firefighters should be
equipped with self-contained breathin
g
apparatus and turnout
g
ear.
UNUSUAL FIRE AND EXPLOSION
HAZARDS:
None known.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS: In case of fire, toxic fumes are emitted. Wear suitable protective equipment.
Do not breathe dust. Eliminate sources of ignition. Avoid contact with skin and
e
y
es.
ENVIRONMENTAL PRECAUTIONS: Prevent from enterin
g
sewer s
y
stem, surface water, or soil.
CLEANING METHODS: Sweep or shovel into appropriate container for disposal. Avoid creation of
nuisance dust.
7. HANDLING AND STORAGE
HANDLING: Wear suitable protective equipment, refer to Section 8.
STORAGE: Keep in a cool, well-ventilated area.