MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01
www.vishay.com
Vishay Beyschlag
Revision: 16-Jun-2021
1
Document Number: 28744
For technical questions, contact: specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thin Film Chip Resistors With Established Reliability
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, and
MCA 1206 VG01 thin film flat chip resistors with established
reliability are the perfect choice for all high-reliability
applications typically found in military, aircraft and
spacecraft electronics. These versions supplement the
families of professional and precision thin film flat chip
resistors MCS 0402, MCT 0603, MCU 0805, and MCA 1206.
FEATURES
• IECQ-CECC approved to EN 140401-801,
version E
• Established reliability, failure rate level E6
• Advanced thin film technology
• Single Lot Date Code
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Military
•Avionics
•Space
Notes
• The failure rate level E6 (10
-6
/h, π
Q
= 0.3), corresponding to MIL Level P, is superior to level E5 (10
-5
/h, π
Q
= 1) and thus may be used as a
replacement
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
TECHNICAL SPECIFICATIONS
DESCRIPTION MCS 0402 VG01 MCT 0603 VG01 MCU 0805 VG01 MCA 1206 VG01
Imperial size 0402 0603 0805 1206
Metric size code (EN/CECC style) RR1005M RR1608M RR2012M RR3216M
Resistance range 10 Ωto 1 MΩ; 0Ω 1 Ωto 1 MΩ; 0Ω 1 Ωto 1 MΩ; 0Ω 1 Ωto 1 MΩ; 0Ω
Resistance tolerance ± 1 %; ± 0.1 %
Temperature coefficient ± 50ppm/K; ± 15 ppm/K
Rated dissipation, P
70
0.063W 0.1W 0.125W 0.25W
Operating voltage, U
max.
AC
RMS
or DC 50V 75 V 150V 200V
Permissible film temperature,
ϑ
F max.
125 °C
Operating temperature range -55 °C to 125 °C
Max. resistance change at P
70
for
resistance, |ΔR/R| max. after:
10 Ωto 1 MΩ 1 Ωto 1 MΩ
1000 h ≤ 0.25 %
8000 h ≤ 0.5 %
225 000 h ≤ 1.5 %
Permissible voltage against ambient
(insulation):
1 min; U
ins
75V 100V 200V 300V
Assessed failure rate level E6 = 10
-6
/h
Quality factor, π
Q
0.3
Failure rate: FIT
observed
< 0.1 x 10
-9
/h
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01
www.vishay.com
Vishay Beyschlag
Revision: 16-Jun-2021
2
Document Number: 28744
For technical questions, contact: specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Other TCR or tolerances, or combinations thereof, or resistance values from other E-series than given are not permitted in EN 140401-801
for version E products
(1)
The temperature coefficient of resistance (TCR) is not specified for 0 Ω jumpers
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES
MCS 0402 VG01
± 50 ppm/K ± 1 % 10 Ω to 1 MΩ E96
± 15 ppm/K ± 0.1 % 100 Ω to 33.2 kΩ E192
Jumper
(1)
; I
max.
= 0.63 A ≤ 20 mΩ 0 Ω -
MCT 0603 VG01
± 50 ppm/K ± 1 % 1 Ω to 1 MΩ E96
± 15 ppm/K ± 0.1 % 100 Ω to 47.5 kΩ E192
Jumper
(1)
; I
max.
= 1 A ≤ 20 mΩ 0 Ω -
MCU 0805 VG01
± 50 ppm/K ± 1 % 1 Ω to 1 MΩ E96
± 15 ppm/K ± 0.1 % 100 Ω to 100 kΩ E192
Jumper
(1)
; I
max.
= 1.5 A ≤ 20 mΩ 0 Ω -
MCA 1206 VG01
± 50 ppm/K ± 1 % 1 Ω to 1 MΩ E96
± 15 ppm/K ± 0.1 % 43.2 Ω to 332 kΩ E192
Jumper
(1)
; I
max.
= 2 A ≤ 20 mΩ 0 Ω -
PACKAGING
TYPE / SIZE CODE QUANTITY
PACKAGING
STYLE
WIDTH PITCH
PACKAGING
DIMENSIONS
MCS 0402 VG01
E1 1000
Paper tape
acc. IEC 60286-3,
Type 1a, on reel
8 mm 2 mm
Ø 180 mm/7"
E0 10 000
MCT 0603 VG01
P1 1000
8 mm 4 mm
P5 5000
MCU 0805 VG01
P1 1000
P5 5000
MCA 1206 VG01
P1 1000
P5 5000